Hospital & Clinic Reception Counters
Manufacturing & quotation brief

Project / hospital:
Location / building:
Room / area:
Quantities:
Required delivery date:

Selected configuration:
[ ] Straight reception counter
[ ] Curved or return counter
[ ] Accessible service position
[ ] Reception storage package

Brief attachments:
[ ] Dimensioned floor plan and reception elevations
[ ] Staff positions and visitor service positions
[ ] Equipment dimensions and power/data locations
[ ] Storage quantities, locks and access requirements
[ ] Finish references and specified cleaning products
[ ] Delivery access, installation scope and required date

Specification details to confirm:
Overall layout:
Provide counter length, depth, shape, wall interfaces, staff entry and the number of working positions. Identify joints and any sections that must pass through lifts or doors.
Approved value / reference:

Work & transaction surfaces:
Dimension staff worktops and visitor ledges separately. Show the selected service heights, clearances, edge profiles and accessible position on the reception elevation.
Approved value / reference:

Equipment & cable access:
Locate monitors, payment devices, printers and power/data outlets. Coordinate cable grommets, routing voids and removable service panels with the equipment schedule.
Approved value / reference:

Storage & security:
Schedule drawer sizes, cabinet doors, locks and keying requirements. Define document storage and staff-side access rather than relying on the reference image.
Approved value / reference:

Materials & cleaning:
Compare the selected solid-surface, laminate or other finish using current supplier documents. Review seams, edges and compatibility with the facility’s specified cleaning products.
Approved value / reference:

Delivery & installation:
Confirm site measurements, split sections, fixing details, service connections and installation responsibility. Set the approval sequence and delivery access before production.
Approved value / reference:

Approved materials / colours:
Samples and drawings required before production:
Measurement, installation and service-connection responsibility:
Product-specific cleaning and test documents:
Warranty and replacement parts to confirm:
Supply boundaries and exclusions:

Range details:
https://www.bsatrading.ae/products/healthcare/reception-counters/
Request a quote:
https://www.bsatrading.ae/request-quote/?from=%2Fproducts%2Fhealthcare%2Freception-counters%2F

Two-station reception counter
Proposed dimensions and materials for development only; production requires fabricator review, approved drawings and samples.
Starting dimensions: Main counter W 3600 × D 800 × H 1100 mm; staff worktop H 740 mm. Lower visitor position W 1200 × D 700 × H 760 mm.
Construction direction: Solid-surface worktop and front over a supported joinery carcass; laminate staff-side cabinets, removable access panels and recessed plinth. Confirm substrate and assembly details with the fabricator.
Equipment & storage: Two staff positions, cable grommets and routing voids, lockable drawer pedestals and a coordinated return. Equipment, electrical fittings and connections are scheduled separately.
Before production: Confirm service clearances and project access requirements, site dimensions, split sections, material samples, fixing details and signed shop drawings. The image is a concept, not a measured drawing.