Product Specification Generator

Professional tool

01Frame the brief
02Check controls
03Issue output

Project identity

Project details Enter once · reused across every tool

Not added

MethodologyAuthority basis, review gates and live sources. BSA-SPEC-M03.2 · reviewed 21 Aug 2026

Methodology

Combine the reusable project identity with two core answers: a plain furniture item name and its design/performance intent. Infer the product category from the item and the operating application from the complete brief, preserving product-specific structural routes when exterior exposure is detected. Quantity, issue maturity and issued project requirements remain optional controls. The engine then derives nineteen numbered clauses, applicable evidence, combined specialist decisions and a seven-stage inspection and release plan.

Required review gates

Control item identity, geometry and design intent
Issue exact project loads, cycles and specialist acceptance criteria
Accept traceable evidence, samples and production first-off
Close deviations, inspections, shipment release and handover records

Authority & standards register

Live links · issue must be reconfirmed

Issuer	Reference	Applied scope	Project evidence action
ISO/TC 136	Furniture standards catalogue ↗	Live current furniture-category standards register	Select the current product-specific method and issue project acceptance requirements separately
ISO	ISO 7173:2023 ↗	Chair and stool strength and durability method	Published with revision in development; confirm successor status plus project loads, cycles and acceptance at issue
ISO	ISO 19682:2023 ↗	Table structural stability, strength and durability methods	Surface, ageing, fire and electrical requirements require separate routes
ISO	ISO 7170:2021 ↗	Storage-unit strength, durability and stability methods	Under review and does not itself set project acceptance criteria
ISO	ISO 19833:2018 ↗	Adult-bed structural stability, strength and durability route	Confirm exact product scope and add separate routes for upholstery, storage, fire, electrical and specialist functions
ISO	ISO 24975:2026 ↗	Bed and mattress measurement methods and recommended tolerances	Coordinate the actual mattress, frame and base system plus the project fit requirements
IEC	IEC 60598-1:2024 ↗	General luminaire safety requirements and tests	Electrical consultant to confirm adopted edition, applicable part-2, supply, controls and authority requirements

This is a coordinated furniture specification basis—not a sealed engineering design, test certificate, authority approval or automatic product acceptance. Exact loads, cycles, acceptance values, fire, electrical, accessibility, site exposure and authority requirements remain with the appointed project parties.

Furniture item brief

Define the item once; the technical specification builds itself

2 core decisions → 19 clauses

What furniture item are you specifying? *

What should it look and perform like? *

Review inferred detailsCategory and use planned from the brief · 1 item · Technical coordination

Furniture category Automatic unless changed

Application Automatic unless changed

Quantity

Item reference Optional

Issue route Automatic unless changed

Dimensions or controlled drawing reference Recommended

Issued project requirements Optional Leave blank when no exact route has been issued. The dossier will preserve the responsible-specialist decision as an open gate.

Two answers build a nineteen-clause specification basis.

Category and application intelligence build the construction, performance, evidence, specialist and inspection routes without pretending to approve the product.

Furniture product specification

Item reference-

Quantity-

Derived duty-

Issue route-

What blocks issue

Resolve before the stated issue route

Pricing route

The generated decision state sets the correct commercial route.

Complete specification dossier Numbered clauses, evidence routes, inspection gates and current technical sources. Review dossier ↓

Numbered technical specification

Supplier to return clause-by-clause responses and deviations

Product-specific evidence register

Exact offered item, revision and production route required

Performance area	Candidate route	Required evidence	Acceptance owner

Inspection and release plan

No production or shipment beyond an unresolved hold

Gate	Supplier submission / inspection	Acceptance control	State

Current technical authority basis

Status checked 21 Aug 2026

This is a coordinated furniture specification basis—not a sealed engineering design, test certificate, authority approval or automatic product acceptance. The responsible project parties must issue exact loads, cycles, acceptance values and specialist requirements, then close evidence, samples, inspections and deviations.

Hotels

Restaurants

Cafés

Spa & Beauty

Outdoor & Poolside

Office & Workspace