Fabrics & Upholstery · Furniture specification
P Kaufmann Epiphany Polyurethane Furniture Specifications
A contract polyurethane upholstery option for tailored seating that needs a leather-like appearance with consistent colour and practical maintenance.
Current material reference
100% polyurethane face; commercial contract upholstery
Named supplier reference · current issue must be confirmed
Material decision summary
Project suitability at a glance.
Select the exact textile by end use, cleaning regime and verified test data; fibre content or abrasion alone is not enough.
Best for
- +Tailored commercial seating requiring a consistent leather-like surface
Avoid when
- −Hydrolysis resistance and cleaning chemistry have not been confirmed
- Traffic level
- High
- Maintenance
- Low
- Visual variation
- Medium
- Relative budget
- ●●○○
- Suitable environments
- Interior · High traffic · Food service
Material overview
Most requested furniture applications
Specify abrasion, cleaning method, flame performance, lightfastness, colourfastness, pilling, width and repeat according to the exact furniture location. “Contract grade” alone is not a complete specification.
Material-specific authority schedule
Ten controls owned by this exact material—not inherited category rows. Final values are confirmed from supplier data, the project sample and shop drawings.
- Declared project reference
- P Kaufmann Epiphany Polyurethane: 100% polyurethane face; commercial contract upholstery
- Exact material identity
- Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation.
- Technical system definition
- A polyurethane-faced contract upholstery material engineered for a consistent leather-like surface; backing, coating chemistry and humidity ageing control its real service life.
- Selection differentiator
- Tailored leather-like uniformity with a PU wear face for commercial seating.
- Critical approval decision
- Do not approve “100% PU” as a complete specification. Confirm backing, coating build, hydrolysis ageing and exact disinfectant compatibility.
- Non-equivalent substitute
- PVC, silicone, PU and blended coated fabrics are not interchangeable by colour or embossing.
- Fabrication focus
- Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress.
- GCC exposure limit
- Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors.
- Material-specific care rule
- Approve disinfectant chemistry against the topcoat, not only the PU generic description.
- Reject the delivery when
- Reject tackiness, delamination, edge whitening, cracking, permanent stretch or cleaner softening.
Approval pack
Documents required before ordering.
Named supplier reference · current issue must be confirmed
- P Kaufmann Epiphany Polyurethane: Identity/source evidence: Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation.
- P Kaufmann Epiphany Polyurethane: Signed selection evidence: Current TDS and test report identify the exact article/colour construction.
- P Kaufmann Epiphany Polyurethane: Second technical gate: Acceptance includes no tackiness, peel, cracking or unacceptable colour/hand change.
- P Kaufmann Epiphany Polyurethane: Factory close-out: Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress.
Lead time & availability
Confirmed after source, finish and quantity selection
Family inspection atlas
A shared visual reference for construction and fabrication.
This atlas is shared by the material family; it is not a microscopy record of this exact selection. The approved sample and current supplier documents govern final colour and construction.
Material identity
What is unique—and what is shared with the family.
The exact material fingerprint comes first. Shared family science is explicitly separated in a collapsible appendix instead of being presented as unique content.
51 material-specific points · 39 shared family references
01 · Material fingerprint
What makes this exact selection technically distinct?
Position in the material family
Coated contract surface
- Reference that must be declared
- Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation.
- Selection differentiator
- Tailored leather-like uniformity with a PU wear face for commercial seating.
- Not an equivalent substitute
- PVC, silicone, PU and blended coated fabrics are not interchangeable by colour or embossing.
- Reject the delivery when
- Reject tackiness, delamination, edge whitening, cracking, permanent stretch or cleaner softening.
Shared family reference
Open the shared Fabrics & Upholstery engineering appendix
This appendix applies to the complete Fabrics & Upholstery family. It is retained as supporting reference and is not counted as unique content for this material.
Shared family reference
Open the shared Fabrics & Upholstery engineering appendix
This appendix applies to the complete Fabrics & Upholstery family. It is retained as supporting reference and is not counted as unique content for this material.
02 · System anatomy
The material is not a single surface.
A polyurethane-faced contract upholstery material engineered for a consistent leather-like surface; backing, coating chemistry and humidity ageing control its real service life.
01Wear face
Layer function
The visible fibre, pile or polymer film that receives abrasion, light, spills and cleaning.
How to verify
Declare fibre/polymer identity, colour, surface finish and exact tested article.
02Ground construction
Layer function
Woven, knitted or coated construction controls stretch, seam behaviour, drape and appearance retention.
How to verify
Record weave/knit/coating route, usable width, repeat and directional use.
03Backing / treatment
Layer function
Backing, FR treatment, stain finish or interliner can materially change hand, adhesion and fire behaviour.
How to verify
Approve the same backing and treatment represented in current test evidence.
04Upholstery composite
Layer function
Foam, interliner, adhesive, thread, seam and frame complete the performance system.
How to verify
Test and prototype the proposed cover/filling composite, not the loose textile alone.
03 · Decision gates
Reference benchmarks and the project rule.
Abrasion
01- Reference band
- General contract and high-traffic bands must use one stated method; ACT cites 40,000 Martindale cycles or 30,000 Wyzenbeek double rubs for high-traffic woven upholstery.
- Project rule
- Treat the result as comparative laboratory evidence, never a service-life promise.
- Evidence status
- Current report for exact article, colour and backing
Pilling
02- Reference band
- ACT woven-upholstery reference: Class 3 minimum under ASTM D3511 or ASTM D4970.
- Project rule
- Increase the project requirement where a smooth appearance is critical.
- Evidence status
- Test report plus handled prototype
Seam slippage
03- Reference band
- ACT woven-upholstery reference: 25 lbf minimum in warp and weft under ASTM D4034.
- Project rule
- Prototype curved corners, tight tailoring and high-load seams.
- Evidence status
- Laboratory result and seam sample
Light fastness
04- Reference band
- ACT indoor woven reference: Grade 4 minimum at 40 hours under its cited AATCC routes; exterior exposure needs a separate outdoor route.
- Project rule
- Define window, atrium or exterior exposure rather than saying “colourfast”.
- Evidence status
- Exact-colour report and exposure location
Cleaning compatibility
05- Reference band
- No universal number: record chemical name, dilution, contact time, rinse and frequency.
- Project rule
- Test the operator’s actual detergent/disinfectant on production material.
- Evidence status
- Written supplier compatibility and cleanability trial
Fire route
06- Reference band
- Project and occupancy specific; results belong to the tested upholstery composite.
- Project rule
- State cover, treatment, interliner and filling represented by the certificate.
- Evidence status
- Current composite test evidence
04 · Family comparison
Four visually related systems that are not technically equivalent.
Coated contract surface
- Best use
- F&B, healthcare-style cleaning and high-turnover seating where wipeability is central.
- Trade-off / constraint
- Hydrolysis, coating adhesion, heat and chemical compatibility must be verified.
Woven performance textile
- Best use
- General contract upholstery requiring comfort, texture and repairable tailoring.
- Trade-off / constraint
- Snagging, pilling, seam slippage and lot variation remain construction dependent.
Velvet / pile textile
- Best use
- Luxury guestrooms and controlled public areas where depth and light response matter.
- Trade-off / constraint
- Pile marking, pressure shading and cleaning skill are visible operational issues.
Solution-dyed outdoor textile
- Best use
- Pool, terrace and coastal cushions with a draining, quick-drying complete build-up.
- Trade-off / constraint
- Face-fabric performance cannot compensate for wet foam, trapped water or corroding hardware.
05 · Factory handbook
Hold points from receiving through production release.
Fabrication focus for this exact material
Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress.
-
01Roll receiving
Control instruction
Record article, colour, dye lot, roll length, usable width, defects and face direction before acceptance.
Close-out evidence
Roll map, labels and photographed defect log
-
02Yield engineering
Control instruction
Nest furniture patterns using the approved nap, railroad direction, repeat and matching rule.
Close-out evidence
Cutting plan with net, repeat, waste and attic-stock quantities
-
03Seam prototype
Control instruction
Set needle, thread, stitch, seam allowance, backing and tension on the actual composite.
Close-out evidence
Signed high-stress seam and corner sample
-
04First-off upholstery
Control instruction
Review pattern placement, pile direction, seam grin, puckering, comfort interface and cleanability.
Close-out evidence
Approved first-off under project lighting
-
05Bulk release
Control instruction
Segregate lots, retain controls and prohibit silent backing/treatment substitutions.
Close-out evidence
Production traveller tied to control sample and lot
06 · Climate & operations
GCC exposure matrix and maintenance plan.
Material-specific climate warning
Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors.
01Air-conditioned guestroom
Preferred- Material response
- Generally stable, but window light and luggage abrasion remain local risks.
- Design control
- Select by item duty; protect window-adjacent colours and high-contact edges.
02High-turnover lobby
Conditional- Material response
- Appearance change, pilling, seam load and cleaning frequency dominate.
- Design control
- Use contract evidence plus full-size first-off and replaceable detailing.
03Food & beverage
Conditional- Material response
- Oils, coloured liquids and repeated chemical cleaning challenge the whole composite.
- Design control
- Approve stain/chemical trials and inaccessible-seam hygiene details.
04Direct sun / atrium
Conditional- Material response
- Colour and polymer ageing accelerate; dark shades may heat strongly.
- Design control
- Require exact-colour light evidence and shade strategy.
05Pool / wet clothing
Avoid- Material response
- Moisture, chlorine, sunscreen and slow drying create staining and microbial risk.
- Design control
- Use an approved outdoor composite with drainage, ventilation and cleanable seams.
06Coastal exterior
Avoid- Material response
- UV, salt, humidity, windborne soil and wet foam act simultaneously.
- Design control
- Only purpose-designed exterior fabric, thread, foam, drainage and hardware qualify.
Operational maintenance plan
Material-specific care rule
Approve disinfectant chemistry against the topcoat, not only the PU generic description.
-
01Each service / daily
Action
Vacuum or brush loose soil in the approved direction; blot fresh spills immediately.
Prohibited
Do not rub a wet stain or flood seams.
-
02After a spill
Action
Identify soil, use the approved dilution and work from edge to centre; rinse only if instructed.
Prohibited
No unlisted solvent, bleach or heat.
-
03Monthly
Action
Inspect high-contact fronts, piping, corners, seams, pile direction and concealed moisture.
Prohibited
Do not wait for foam or backing damage to become visible.
-
04Periodic deep clean
Action
Use the supplier-approved professional method and dry the composite completely before service.
Prohibited
No generic extraction method without backing/foam approval.
-
05Repair / replacement
Action
Use retained same-lot stock where possible; record replacement lot and panel position.
Prohibited
Do not mix a visibly different lot across one furniture face.
07 · Reference library
The language that governs the decision—and where it comes from.
Material glossary
- 01Martindale
- A laboratory abrasion method; the cycle result is method-specific and does not predict years of service.
- 02Wyzenbeek
- A reciprocating abrasion method reported in double rubs; it is not numerically interchangeable with Martindale.
- 03Railroaded
- The pattern or construction can be used across the roll width, affecting seams and yield.
- 04Crocking
- Transfer of colour from the textile by dry or wet rubbing.
- 05Dye lot
- A production batch expected to have closer colour continuity than separately dyed batches.
Professional and standards sources
- 01
ACT
Woven upholstery performance guidelines
Voluntary reference bands for abrasion, pilling, strength, seams and colourfastness.
Open primary source ↗ - 02
ISO
ISO 12947-2 Martindale abrasion
Specimen breakdown determination for textile fabrics.
Open primary source ↗ - 03
- 04
BSI
BS 7176 non-domestic seating
Ignition-resistance classification through tested upholstery composites.
Open primary source ↗
Material-specific technical dossier
P Kaufmann Epiphany Polyurethane controls from decision to production.
Every row below is tied to this material’s identity, differentiator, fabrication, exposure or care route; no generic family rows are included in this dossier.
8 unique controls · 5 contextual test applications · 5 material-specific risks
System definition
A polyurethane-faced contract upholstery material engineered for a consistent leather-like surface; backing, coating chemistry and humidity ageing control its real service life.
Critical decision
Do not approve “100% PU” as a complete specification. Confirm backing, coating build, hydrolysis ageing and exact disinfectant compatibility.
01 · Selection variables
What the material schedule must lock.
01P Kaufmann Epiphany Polyurethane: PU chemistry & backing
- What must be declared
- Declared polyurethane route, support textile, coating mass and total weight
- Approval basis
- Current TDS and test report identify the exact article/colour construction.
02P Kaufmann Epiphany Polyurethane: Humidity ageing
- What must be declared
- Hydrolysis exposure, flex after ageing and surface appearance
- Approval basis
- Acceptance includes no tackiness, peel, cracking or unacceptable colour/hand change.
03P Kaufmann Epiphany Polyurethane: identity declaration
- What must be declared
- Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation.
- Approval basis
- Do not approve “100% PU” as a complete specification. Confirm backing, coating build, hydrolysis ageing and exact disinfectant compatibility.
04P Kaufmann Epiphany Polyurethane: equivalency boundary
- What must be declared
- Tailored leather-like uniformity with a PU wear face for commercial seating.
- Approval basis
- PVC, silicone, PU and blended coated fabrics are not interchangeable by colour or embossing.
05P Kaufmann Epiphany Polyurethane: factory execution
- What must be declared
- Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress.
- Approval basis
- Current TDS and test report identify the exact article/colour construction.
06P Kaufmann Epiphany Polyurethane: GCC exposure control
- What must be declared
- Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors.
- Approval basis
- Release only when the project detail and maintenance route close this exact exposure risk for P Kaufmann Epiphany Polyurethane.
07P Kaufmann Epiphany Polyurethane: operational care route
- What must be declared
- Approve disinfectant chemistry against the topcoat, not only the PU generic description.
- Approval basis
- Issue a named cleaning and repair method for P Kaufmann Epiphany Polyurethane; generic family care is not approval.
08P Kaufmann Epiphany Polyurethane: delivery rejection boundary
- What must be declared
- Reject tackiness, delamination, edge whitening, cracking, permanent stretch or cleaner softening.
- Approval basis
- The signed sample, first-off item and delivery inspection must all close this rejection condition for P Kaufmann Epiphany Polyurethane.
| Variable | What must be declared | Approval basis |
|---|---|---|
| 01P Kaufmann Epiphany Polyurethane: PU chemistry & backing | Declared polyurethane route, support textile, coating mass and total weight | Current TDS and test report identify the exact article/colour construction. |
| 02P Kaufmann Epiphany Polyurethane: Humidity ageing | Hydrolysis exposure, flex after ageing and surface appearance | Acceptance includes no tackiness, peel, cracking or unacceptable colour/hand change. |
| 03P Kaufmann Epiphany Polyurethane: identity declaration | Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation. | Do not approve “100% PU” as a complete specification. Confirm backing, coating build, hydrolysis ageing and exact disinfectant compatibility. |
| 04P Kaufmann Epiphany Polyurethane: equivalency boundary | Tailored leather-like uniformity with a PU wear face for commercial seating. | PVC, silicone, PU and blended coated fabrics are not interchangeable by colour or embossing. |
| 05P Kaufmann Epiphany Polyurethane: factory execution | Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress. | Current TDS and test report identify the exact article/colour construction. |
| 06P Kaufmann Epiphany Polyurethane: GCC exposure control | Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors. | Release only when the project detail and maintenance route close this exact exposure risk for P Kaufmann Epiphany Polyurethane. |
| 07P Kaufmann Epiphany Polyurethane: operational care route | Approve disinfectant chemistry against the topcoat, not only the PU generic description. | Issue a named cleaning and repair method for P Kaufmann Epiphany Polyurethane; generic family care is not approval. |
| 08P Kaufmann Epiphany Polyurethane: delivery rejection boundary | Reject tackiness, delamination, edge whitening, cracking, permanent stretch or cleaner softening. | The signed sample, first-off item and delivery inspection must all close this rejection condition for P Kaufmann Epiphany Polyurethane. |
02 · Verification
Test and evidence matrix.
Test methods are not compliance certificates or automatic pass values. The project must state the method, required result, tested construction and current report it will accept.
ISO 12947-2 / ISO 12947-4
01- What it measures
- Martindale specimen breakdown and appearance change for uncoated textiles.
- How to use it here
- Specify the applicable part and project acceptance level; a cycle count is not a universal service-life guarantee. Material-specific acceptance for P Kaufmann Epiphany Polyurethane: Current TDS and test report identify the exact article/colour construction.
ISO 5470-2
02- What it measures
- Wet and dry abrasion of rubber- or plastics-coated fabric surfaces.
- How to use it here
- Use for coated faux leather/PU faces where ISO 12947 for uncoated textiles is not the correct surface method. Material-specific acceptance for P Kaufmann Epiphany Polyurethane: Acceptance includes no tackiness, peel, cracking or unacceptable colour/hand change.
ISO 105-X12
03- What it measures
- Colour transfer and staining under dry and wet rubbing.
- How to use it here
- Test the exact colour; dark and saturated shades can behave differently from collection averages. Material-specific acceptance for P Kaufmann Epiphany Polyurethane: Require credible humidity-ageing duration/conditions and post-age flex/appearance evidence.
ISO 105-B02
04- What it measures
- Colour fastness to artificial light representative of daylight.
- How to use it here
- Prioritise for window-adjacent, atrium and exterior applications; state the required rating. Material-specific acceptance for P Kaufmann Epiphany Polyurethane: Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress.
BS EN 1021-1 / BS 7176
05- What it measures
- Ignitability of upholstery composites and non-domestic seating hazard classification.
- How to use it here
- The project fire strategy determines the route. Submit evidence for the actual cover/filling composite. Material-specific acceptance for P Kaufmann Epiphany Polyurethane: Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors.
03 · Performance
Failure-mode and control register.
01P Kaufmann Epiphany Polyurethane: Hydrolysis-driven delamination
- Likely cause
- Moist heat breaks down an unsuitable PU coating before abrasion wear is reached.
- Preventive control
- Require credible humidity-ageing duration/conditions and post-age flex/appearance evidence.
02P Kaufmann Epiphany Polyurethane: non-equivalent substitution accepted
- Likely cause
- PVC, silicone, PU and blended coated fabrics are not interchangeable by colour or embossing.
- Preventive control
- Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation.
03P Kaufmann Epiphany Polyurethane: material signature lost in fabrication
- Likely cause
- The workshop route does not implement the material-specific fabrication focus: Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress.
- Preventive control
- Acceptance includes no tackiness, peel, cracking or unacceptable colour/hand change.
04P Kaufmann Epiphany Polyurethane: GCC exposure mismatch
- Likely cause
- Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors.
- Preventive control
- Re-detail, relocate or reject P Kaufmann Epiphany Polyurethane where the stated exposure cannot be controlled.
05P Kaufmann Epiphany Polyurethane: cleaning or maintenance damage
- Likely cause
- Approve disinfectant chemistry against the topcoat, not only the PU generic description.
- Preventive control
- Train operations on the named care route and retain a signed repair reference for P Kaufmann Epiphany Polyurethane.
| Failure mode | Likely cause | Preventive control |
|---|---|---|
| 01P Kaufmann Epiphany Polyurethane: Hydrolysis-driven delamination | Moist heat breaks down an unsuitable PU coating before abrasion wear is reached. | Require credible humidity-ageing duration/conditions and post-age flex/appearance evidence. |
| 02P Kaufmann Epiphany Polyurethane: non-equivalent substitution accepted | PVC, silicone, PU and blended coated fabrics are not interchangeable by colour or embossing. | Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation. |
| 03P Kaufmann Epiphany Polyurethane: material signature lost in fabrication | The workshop route does not implement the material-specific fabrication focus: Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress. | Acceptance includes no tackiness, peel, cracking or unacceptable colour/hand change. |
| 04P Kaufmann Epiphany Polyurethane: GCC exposure mismatch | Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors. | Re-detail, relocate or reject P Kaufmann Epiphany Polyurethane where the stated exposure cannot be controlled. |
| 05P Kaufmann Epiphany Polyurethane: cleaning or maintenance damage | Approve disinfectant chemistry against the topcoat, not only the PU generic description. | Train operations on the named care route and retain a signed repair reference for P Kaufmann Epiphany Polyurethane. |
04 · Tender-ready
Copy-ready specification clause.
Provide P Kaufmann Contract Epiphany polyurethane upholstery or approved equivalent for commercial interior seating. “100% PU” refers only to the stated face and is not sufficient: submit backing composition, total/coating weight, thickness, abrasion method, flex resistance before and after humidity ageing, coating adhesion, dry/wet rub fastness, named-cleaner/disinfectant compatibility and fire evidence for the complete upholstery composite. Approve the exact colour and production lot on a first-off item after seam, corner and cleaner review.
05 · Quality control
Inspection plan from submittal to handover.
01P Kaufmann Epiphany Polyurethane: identity and source
- Inspection
- Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation.
- Acceptance / hold point
- Documents, labels and physical material all identify the same P Kaufmann Epiphany Polyurethane construction and source.
02P Kaufmann Epiphany Polyurethane: control sample
- Inspection
- Tailored leather-like uniformity with a PU wear face for commercial seating.
- Acceptance / hold point
- Current TDS and test report identify the exact article/colour construction.
03P Kaufmann Epiphany Polyurethane: first-off fabrication
- Inspection
- Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress.
- Acceptance / hold point
- Acceptance includes no tackiness, peel, cracking or unacceptable colour/hand change.
04P Kaufmann Epiphany Polyurethane: exposure and care trial
- Inspection
- Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors. Approve disinfectant chemistry against the topcoat, not only the PU generic description.
- Acceptance / hold point
- Require credible humidity-ageing duration/conditions and post-age flex/appearance evidence.
05P Kaufmann Epiphany Polyurethane: delivery release
- Inspection
- Reject tackiness, delamination, edge whitening, cracking, permanent stretch or cleaner softening.
- Acceptance / hold point
- P Kaufmann Epiphany Polyurethane is released only when no stated rejection condition is present and the signed reference remains traceable.
| Stage | Inspection | Acceptance / hold point |
|---|---|---|
| 01P Kaufmann Epiphany Polyurethane: identity and source | Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation. | Documents, labels and physical material all identify the same P Kaufmann Epiphany Polyurethane construction and source. |
| 02P Kaufmann Epiphany Polyurethane: control sample | Tailored leather-like uniformity with a PU wear face for commercial seating. | Current TDS and test report identify the exact article/colour construction. |
| 03P Kaufmann Epiphany Polyurethane: first-off fabrication | Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress. | Acceptance includes no tackiness, peel, cracking or unacceptable colour/hand change. |
| 04P Kaufmann Epiphany Polyurethane: exposure and care trial | Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors. Approve disinfectant chemistry against the topcoat, not only the PU generic description. | Require credible humidity-ageing duration/conditions and post-age flex/appearance evidence. |
| 05P Kaufmann Epiphany Polyurethane: delivery release | Reject tackiness, delamination, edge whitening, cracking, permanent stretch or cleaner softening. | P Kaufmann Epiphany Polyurethane is released only when no stated rejection condition is present and the signed reference remains traceable. |
Required approval evidence
- +P Kaufmann Epiphany Polyurethane: Identity/source evidence: Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation.
- +P Kaufmann Epiphany Polyurethane: Signed selection evidence: Current TDS and test report identify the exact article/colour construction.
- +P Kaufmann Epiphany Polyurethane: Second technical gate: Acceptance includes no tackiness, peel, cracking or unacceptable colour/hand change.
- +P Kaufmann Epiphany Polyurethane: Factory close-out: Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress.
- +P Kaufmann Epiphany Polyurethane: Exposure and care record: Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors. Approve disinfectant chemistry against the topcoat, not only the PU generic description.
- +P Kaufmann Epiphany Polyurethane: Delivery rejection record: Reject tackiness, delamination, edge whitening, cracking, permanent stretch or cleaner softening.
Questions to close before approval
- 01P Kaufmann Epiphany Polyurethane: Has the exact identity been declared and evidenced: Named P/Kaufmann Contract Epiphany polyurethane reference; exact face, backing, hydrolysis and current performance data require supplier confirmation?
- 02P Kaufmann Epiphany Polyurethane: Which project requirement makes this differentiator necessary: Tailored leather-like uniformity with a PU wear face for commercial seating?
- 03P Kaufmann Epiphany Polyurethane: Has the team excluded the non-equivalent route: PVC, silicone, PU and blended coated fabrics are not interchangeable by colour or embossing?
- 04P Kaufmann Epiphany Polyurethane: How will the factory prove this execution control: Limit adhesive and heat exposure, control stretch direction and test sharp folds for whitening or coating stress?
- 05P Kaufmann Epiphany Polyurethane: Can the project control this GCC exposure: Require humid-ageing/hydrolysis evidence appropriate to Gulf warehousing and interiors?
- 06P Kaufmann Epiphany Polyurethane: Who owns this operating rule after handover: Approve disinfectant chemistry against the topcoat, not only the PU generic description?
Exact material application
P Kaufmann Epiphany Polyurethane on a dedicated furniture product.
This material-specific application image shows P Kaufmann Epiphany Polyurethane on its own product and is not reused by any other material page. Final colour, pattern and finish remain subject to the approved physical sample.
Project notes
From sample to production.
01
What to specify
Specify abrasion, cleaning method, flame performance, lightfastness, colourfastness, pilling, width and repeat according to the exact furniture location. “Contract grade” alone is not a complete specification.
02
Fabrication & detailing
Confirm repeat, direction, seam placement, FR interliner and foam compatibility before cutting. High-contact furniture should use replaceable covers or serviceable upholstery details where practical.
03
Colour & finish approval
Colour, texture, pile direction and dye-lot variation are approved from a current cutting. Pattern alignment and railroad suitability are checked against the furniture drawing.
04
Care & maintenance
Vacuum gently and blot spills immediately. Use only the cleaning method approved for the selected fibre and finish; test any agent on a concealed sample first.
Specification note
This page is a preliminary specification guide. No value, brand reference or material name constitutes automatic compliance. Current product data, test reports, physical sample or slab and the furniture construction must be approved for each project before ordering or manufacture.
Related materials
