Fabrics & Upholstery · Material specification
Wool-Blend Upholstery Fabric Material Specifications
A refined contract textile for lounge, executive and guestroom seating where natural handle, resilient appearance and subdued colour depth are preferred.
Current material reference
Wool-rich woven upholstery; resilient matte handle with composition and FR route declared
Material guidance · supplier data required for approval
Material decision summary
Project suitability at a glance.
Select the exact textile by end use, cleaning regime and verified test data; fibre content or abrasion alone is not enough.
Best for
- +Refined lounge, executive and guestroom seating with a resilient natural handle
Avoid when
- −Aggressive wet cleaning, uncontrolled moth risk or an undeclared FR treatment is expected
- Traffic level
- High
- Maintenance
- Medium
- Visual variation
- Medium
- Relative budget
- ●●●○
- Suitable environments
- Interior · High traffic
Material overview
Common material applications
Specify abrasion, cleaning method, flame performance, lightfastness, colourfastness, pilling, width and repeat according to the exact furniture location. “Contract grade” alone is not a complete specification.
Material-specific authority schedule
Ten controls owned by this exact material—not inherited category rows. Final values are confirmed from supplier data, the project sample and shop drawings.
- Declared project reference
- Wool-Blend Upholstery Fabric: Wool-rich woven upholstery; resilient matte handle with composition and FR route declared
- Exact material identity
- Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared.
- Technical system definition
- A wool-rich woven contract textile blended for strength and appearance recovery. Fibre percentages, yarn, weave, finish, moth treatment, backing and composite fire route govern its use.
- Selection differentiator
- Natural matte depth, resilient crease recovery and temperature-comforting handle distinguish a genuine wool-rich blend.
- Critical approval decision
- Balance natural handle against cleaning, felting, pilling and fire treatment; the exact wool blend and finish must match the tested article.
- Non-equivalent substitute
- A wool-look polyester cannot reproduce wool fibre response, moisture buffering, felt risk or repair behaviour.
- Fabrication focus
- Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot.
- GCC exposure limit
- Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high.
- Material-specific care rule
- Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks.
- Reject the delivery when
- Reject felting, dimensional change, moth damage, seam slippage, shade mixing, pilling or harsh over-finished handle.
Approval pack
Documents required before ordering.
Material guidance · supplier data required for approval
- Wool-Blend Upholstery Fabric: Identity/source evidence: Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared.
- Wool-Blend Upholstery Fabric: Signed selection evidence: Supplier data, label and test report state one matching article and colour.
- Wool-Blend Upholstery Fabric: Second technical gate: Handled prototype shows no hardening, rings, shrinkage or shade split after approved cleaning.
- Wool-Blend Upholstery Fabric: Factory close-out: Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot.
Lead time & availability
Confirmed after source, finish and quantity selection
Material specimen views
One physical material sample, shown in four detail views.
Every crop comes from this material specimen itself, with no furniture product shown. The approved sample and current supplier documents govern final colour and construction.
Material identity
What is unique—and what is shared with the family.
The exact material fingerprint comes first. Shared family science is explicitly separated in a collapsible appendix instead of being presented as unique content.
51 material-specific points · 39 shared family references
01 · Material fingerprint
What makes this exact selection technically distinct?
Position in the material family
Woven performance textile
- Reference that must be declared
- Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared.
- Selection differentiator
- Natural matte depth, resilient crease recovery and temperature-comforting handle distinguish a genuine wool-rich blend.
- Not an equivalent substitute
- A wool-look polyester cannot reproduce wool fibre response, moisture buffering, felt risk or repair behaviour.
- Reject the delivery when
- Reject felting, dimensional change, moth damage, seam slippage, shade mixing, pilling or harsh over-finished handle.
Shared family reference
Open the shared Fabrics & Upholstery engineering appendix
This appendix applies to the complete Fabrics & Upholstery family. It is retained as supporting reference and is not counted as unique content for this material.
Shared family reference
Open the shared Fabrics & Upholstery engineering appendix
This appendix applies to the complete Fabrics & Upholstery family. It is retained as supporting reference and is not counted as unique content for this material.
02 · System anatomy
The material is not a single surface.
A wool-rich woven contract textile blended for strength and appearance recovery. Fibre percentages, yarn, weave, finish, moth treatment, backing and composite fire route govern its use.
01Wear face
Layer function
The visible fibre, pile or polymer film that receives abrasion, light, spills and cleaning.
How to verify
Declare fibre/polymer identity, colour, surface finish and exact tested article.
02Ground construction
Layer function
Woven, knitted or coated construction controls stretch, seam behaviour, drape and appearance retention.
How to verify
Record weave/knit/coating route, usable width, repeat and directional use.
03Backing / treatment
Layer function
Backing, FR treatment, stain finish or interliner can materially change hand, adhesion and fire behaviour.
How to verify
Approve the same backing and treatment represented in current test evidence.
04Upholstery composite
Layer function
Foam, interliner, adhesive, thread, seam and frame complete the performance system.
How to verify
Test and prototype the proposed cover/filling composite, not the loose textile alone.
03 · Decision gates
Reference benchmarks and the project rule.
Abrasion
01- Reference band
- General contract and high-traffic bands must use one stated method; ACT cites 40,000 Martindale cycles or 30,000 Wyzenbeek double rubs for high-traffic woven upholstery.
- Project rule
- Treat the result as comparative laboratory evidence, never a service-life promise.
- Evidence status
- Current report for exact article, colour and backing
Pilling
02- Reference band
- ACT woven-upholstery reference: Class 3 minimum under ASTM D3511 or ASTM D4970.
- Project rule
- Increase the project requirement where a smooth appearance is critical.
- Evidence status
- Test report plus handled prototype
Seam slippage
03- Reference band
- ACT woven-upholstery reference: 25 lbf minimum in warp and weft under ASTM D4034.
- Project rule
- Prototype curved corners, tight tailoring and high-load seams.
- Evidence status
- Laboratory result and seam sample
Light fastness
04- Reference band
- ACT indoor woven reference: Grade 4 minimum at 40 hours under its cited AATCC routes; exterior exposure needs a separate outdoor route.
- Project rule
- Define window, atrium or exterior exposure rather than saying “colourfast”.
- Evidence status
- Exact-colour report and exposure location
Cleaning compatibility
05- Reference band
- No universal number: record chemical name, dilution, contact time, rinse and frequency.
- Project rule
- Test the operator’s actual detergent/disinfectant on production material.
- Evidence status
- Written supplier compatibility and cleanability trial
Fire route
06- Reference band
- Project and occupancy specific; results belong to the tested upholstery composite.
- Project rule
- State cover, treatment, interliner and filling represented by the certificate.
- Evidence status
- Current composite test evidence
04 · Family comparison
Four visually related systems that are not technically equivalent.
Coated contract surface
- Best use
- F&B, healthcare-style cleaning and high-turnover seating where wipeability is central.
- Trade-off / constraint
- Hydrolysis, coating adhesion, heat and chemical compatibility must be verified.
Woven performance textile
- Best use
- General contract upholstery requiring comfort, texture and repairable tailoring.
- Trade-off / constraint
- Snagging, pilling, seam slippage and lot variation remain construction dependent.
Velvet / pile textile
- Best use
- Luxury guestrooms and controlled public areas where depth and light response matter.
- Trade-off / constraint
- Pile marking, pressure shading and cleaning skill are visible operational issues.
Solution-dyed outdoor textile
- Best use
- Pool, terrace and coastal cushions with a draining, quick-drying complete build-up.
- Trade-off / constraint
- Face-fabric performance cannot compensate for wet foam, trapped water or corroding hardware.
05 · Factory handbook
Hold points from receiving through production release.
Fabrication focus for this exact material
Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot.
-
01Roll receiving
Control instruction
Record article, colour, dye lot, roll length, usable width, defects and face direction before acceptance.
Close-out evidence
Roll map, labels and photographed defect log
-
02Yield engineering
Control instruction
Nest furniture patterns using the approved nap, railroad direction, repeat and matching rule.
Close-out evidence
Cutting plan with net, repeat, waste and attic-stock quantities
-
03Seam prototype
Control instruction
Set needle, thread, stitch, seam allowance, backing and tension on the actual composite.
Close-out evidence
Signed high-stress seam and corner sample
-
04First-off upholstery
Control instruction
Review pattern placement, pile direction, seam grin, puckering, comfort interface and cleanability.
Close-out evidence
Approved first-off under project lighting
-
05Bulk release
Control instruction
Segregate lots, retain controls and prohibit silent backing/treatment substitutions.
Close-out evidence
Production traveller tied to control sample and lot
06 · Climate & operations
GCC exposure matrix and maintenance plan.
Material-specific climate warning
Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high.
01Air-conditioned guestroom
Preferred- Material response
- Generally stable, but window light and luggage abrasion remain local risks.
- Design control
- Select by item duty; protect window-adjacent colours and high-contact edges.
02High-turnover lobby
Conditional- Material response
- Appearance change, pilling, seam load and cleaning frequency dominate.
- Design control
- Use contract evidence plus full-size first-off and replaceable detailing.
03Food & beverage
Conditional- Material response
- Oils, coloured liquids and repeated chemical cleaning challenge the whole composite.
- Design control
- Approve stain/chemical trials and inaccessible-seam hygiene details.
04Direct sun / atrium
Conditional- Material response
- Colour and polymer ageing accelerate; dark shades may heat strongly.
- Design control
- Require exact-colour light evidence and shade strategy.
05Pool / wet clothing
Avoid- Material response
- Moisture, chlorine, sunscreen and slow drying create staining and microbial risk.
- Design control
- Use an approved outdoor composite with drainage, ventilation and cleanable seams.
06Coastal exterior
Avoid- Material response
- UV, salt, humidity, windborne soil and wet foam act simultaneously.
- Design control
- Only purpose-designed exterior fabric, thread, foam, drainage and hardware qualify.
Operational maintenance plan
Material-specific care rule
Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks.
-
01Each service / daily
Action
Vacuum or brush loose soil in the approved direction; blot fresh spills immediately.
Prohibited
Do not rub a wet stain or flood seams.
-
02After a spill
Action
Identify soil, use the approved dilution and work from edge to centre; rinse only if instructed.
Prohibited
No unlisted solvent, bleach or heat.
-
03Monthly
Action
Inspect high-contact fronts, piping, corners, seams, pile direction and concealed moisture.
Prohibited
Do not wait for foam or backing damage to become visible.
-
04Periodic deep clean
Action
Use the supplier-approved professional method and dry the composite completely before service.
Prohibited
No generic extraction method without backing/foam approval.
-
05Repair / replacement
Action
Use retained same-lot stock where possible; record replacement lot and panel position.
Prohibited
Do not mix a visibly different lot across one furniture face.
07 · Reference library
The language that governs the decision—and where it comes from.
Material glossary
- 01Martindale
- A laboratory abrasion method; the cycle result is method-specific and does not predict years of service.
- 02Wyzenbeek
- A reciprocating abrasion method reported in double rubs; it is not numerically interchangeable with Martindale.
- 03Railroaded
- The pattern or construction can be used across the roll width, affecting seams and yield.
- 04Crocking
- Transfer of colour from the textile by dry or wet rubbing.
- 05Dye lot
- A production batch expected to have closer colour continuity than separately dyed batches.
Professional and standards sources
- 01
ACT
Woven upholstery performance guidelines
Voluntary reference bands for abrasion, pilling, strength, seams and colourfastness.
Open primary source ↗ - 02
ISO
ISO 12947-2 Martindale abrasion
Specimen breakdown determination for textile fabrics.
Open primary source ↗ - 03
- 04
BSI
BS 7176 non-domestic seating
Ignition-resistance classification through tested upholstery composites.
Open primary source ↗
Material-specific technical dossier
Wool-Blend Upholstery Fabric controls from decision to production.
Every row below is tied to this material’s identity, differentiator, fabrication, exposure or care route; no generic family rows are included in this dossier.
8 unique controls · 5 contextual test applications · 5 material-specific risks
System definition
A wool-rich woven contract textile blended for strength and appearance recovery. Fibre percentages, yarn, weave, finish, moth treatment, backing and composite fire route govern its use.
Critical decision
Balance natural handle against cleaning, felting, pilling and fire treatment; the exact wool blend and finish must match the tested article.
01 · Selection variables
What the material schedule must lock.
01Wool-Blend Upholstery Fabric: Wool blend identity
- What must be declared
- Wool and synthetic percentages, yarn construction, weight, finish, moth protection and backing
- Approval basis
- Supplier data, label and test report state one matching article and colour.
02Wool-Blend Upholstery Fabric: Moisture and finish response
- What must be declared
- Dimensional change, felting, dye fastness, steam response and cleaner extraction
- Approval basis
- Handled prototype shows no hardening, rings, shrinkage or shade split after approved cleaning.
03Wool-Blend Upholstery Fabric: identity declaration
- What must be declared
- Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared.
- Approval basis
- Balance natural handle against cleaning, felting, pilling and fire treatment; the exact wool blend and finish must match the tested article.
04Wool-Blend Upholstery Fabric: equivalency boundary
- What must be declared
- Natural matte depth, resilient crease recovery and temperature-comforting handle distinguish a genuine wool-rich blend.
- Approval basis
- A wool-look polyester cannot reproduce wool fibre response, moisture buffering, felt risk or repair behaviour.
05Wool-Blend Upholstery Fabric: factory execution
- What must be declared
- Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot.
- Approval basis
- Supplier data, label and test report state one matching article and colour.
06Wool-Blend Upholstery Fabric: GCC exposure control
- What must be declared
- Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high.
- Approval basis
- Release only when the project detail and maintenance route close this exact exposure risk for Wool-Blend Upholstery Fabric.
07Wool-Blend Upholstery Fabric: operational care route
- What must be declared
- Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks.
- Approval basis
- Issue a named cleaning and repair method for Wool-Blend Upholstery Fabric; generic family care is not approval.
08Wool-Blend Upholstery Fabric: delivery rejection boundary
- What must be declared
- Reject felting, dimensional change, moth damage, seam slippage, shade mixing, pilling or harsh over-finished handle.
- Approval basis
- The signed sample, first-off item and delivery inspection must all close this rejection condition for Wool-Blend Upholstery Fabric.
| Variable | What must be declared | Approval basis |
|---|---|---|
| 01Wool-Blend Upholstery Fabric: Wool blend identity | Wool and synthetic percentages, yarn construction, weight, finish, moth protection and backing | Supplier data, label and test report state one matching article and colour. |
| 02Wool-Blend Upholstery Fabric: Moisture and finish response | Dimensional change, felting, dye fastness, steam response and cleaner extraction | Handled prototype shows no hardening, rings, shrinkage or shade split after approved cleaning. |
| 03Wool-Blend Upholstery Fabric: identity declaration | Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared. | Balance natural handle against cleaning, felting, pilling and fire treatment; the exact wool blend and finish must match the tested article. |
| 04Wool-Blend Upholstery Fabric: equivalency boundary | Natural matte depth, resilient crease recovery and temperature-comforting handle distinguish a genuine wool-rich blend. | A wool-look polyester cannot reproduce wool fibre response, moisture buffering, felt risk or repair behaviour. |
| 05Wool-Blend Upholstery Fabric: factory execution | Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot. | Supplier data, label and test report state one matching article and colour. |
| 06Wool-Blend Upholstery Fabric: GCC exposure control | Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high. | Release only when the project detail and maintenance route close this exact exposure risk for Wool-Blend Upholstery Fabric. |
| 07Wool-Blend Upholstery Fabric: operational care route | Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks. | Issue a named cleaning and repair method for Wool-Blend Upholstery Fabric; generic family care is not approval. |
| 08Wool-Blend Upholstery Fabric: delivery rejection boundary | Reject felting, dimensional change, moth damage, seam slippage, shade mixing, pilling or harsh over-finished handle. | The signed sample, first-off item and delivery inspection must all close this rejection condition for Wool-Blend Upholstery Fabric. |
02 · Verification
Test and evidence matrix.
Test methods are not compliance certificates or automatic pass values. The project must state the method, required result, tested construction and current report it will accept.
ISO 12947-2 / ISO 12947-4
01- What it measures
- Martindale specimen breakdown and appearance change for uncoated textiles.
- How to use it here
- Specify the applicable part and project acceptance level; a cycle count is not a universal service-life guarantee. Material-specific acceptance for Wool-Blend Upholstery Fabric: Supplier data, label and test report state one matching article and colour.
ISO 5470-2
02- What it measures
- Wet and dry abrasion of rubber- or plastics-coated fabric surfaces.
- How to use it here
- Use for coated faux leather/PU faces where ISO 12947 for uncoated textiles is not the correct surface method. Material-specific acceptance for Wool-Blend Upholstery Fabric: Handled prototype shows no hardening, rings, shrinkage or shade split after approved cleaning.
ISO 105-X12
03- What it measures
- Colour transfer and staining under dry and wet rubbing.
- How to use it here
- Test the exact colour; dark and saturated shades can behave differently from collection averages. Material-specific acceptance for Wool-Blend Upholstery Fabric: Approve a wool-safe low-moisture route on an upholstered production sample.
ISO 105-B02
04- What it measures
- Colour fastness to artificial light representative of daylight.
- How to use it here
- Prioritise for window-adjacent, atrium and exterior applications; state the required rating. Material-specific acceptance for Wool-Blend Upholstery Fabric: Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot.
BS EN 1021-1 / BS 7176
05- What it measures
- Ignitability of upholstery composites and non-domestic seating hazard classification.
- How to use it here
- The project fire strategy determines the route. Submit evidence for the actual cover/filling composite. Material-specific acceptance for Wool-Blend Upholstery Fabric: Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high.
03 · Performance
Failure-mode and control register.
01Wool-Blend Upholstery Fabric: Felting, rings or dimensional distortion after cleaning
- Likely cause
- Excess heat, alkalinity, agitation or uncontrolled wet extraction changes the wool-rich face.
- Preventive control
- Approve a wool-safe low-moisture route on an upholstered production sample.
02Wool-Blend Upholstery Fabric: non-equivalent substitution accepted
- Likely cause
- A wool-look polyester cannot reproduce wool fibre response, moisture buffering, felt risk or repair behaviour.
- Preventive control
- Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared.
03Wool-Blend Upholstery Fabric: material signature lost in fabrication
- Likely cause
- The workshop route does not implement the material-specific fabrication focus: Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot.
- Preventive control
- Handled prototype shows no hardening, rings, shrinkage or shade split after approved cleaning.
04Wool-Blend Upholstery Fabric: GCC exposure mismatch
- Likely cause
- Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high.
- Preventive control
- Re-detail, relocate or reject Wool-Blend Upholstery Fabric where the stated exposure cannot be controlled.
05Wool-Blend Upholstery Fabric: cleaning or maintenance damage
- Likely cause
- Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks.
- Preventive control
- Train operations on the named care route and retain a signed repair reference for Wool-Blend Upholstery Fabric.
| Failure mode | Likely cause | Preventive control |
|---|---|---|
| 01Wool-Blend Upholstery Fabric: Felting, rings or dimensional distortion after cleaning | Excess heat, alkalinity, agitation or uncontrolled wet extraction changes the wool-rich face. | Approve a wool-safe low-moisture route on an upholstered production sample. |
| 02Wool-Blend Upholstery Fabric: non-equivalent substitution accepted | A wool-look polyester cannot reproduce wool fibre response, moisture buffering, felt risk or repair behaviour. | Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared. |
| 03Wool-Blend Upholstery Fabric: material signature lost in fabrication | The workshop route does not implement the material-specific fabrication focus: Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot. | Handled prototype shows no hardening, rings, shrinkage or shade split after approved cleaning. |
| 04Wool-Blend Upholstery Fabric: GCC exposure mismatch | Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high. | Re-detail, relocate or reject Wool-Blend Upholstery Fabric where the stated exposure cannot be controlled. |
| 05Wool-Blend Upholstery Fabric: cleaning or maintenance damage | Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks. | Train operations on the named care route and retain a signed repair reference for Wool-Blend Upholstery Fabric. |
04 · Tender-ready
Copy-ready specification clause.
Provide wool-blend contract upholstery with exact wool/synthetic composition, yarn and weave, weight, width, backing, finish, moth treatment and colour declared. Submit abrasion/appearance, pilling, seam slippage, rub/light fastness, dimensional change, approved cleaning and composite fire evidence for the same finished article. Demonstrate steam, seam and cleaner response on the first-off item; wool-look polyester or an unverified post-treatment is not equivalent.
05 · Quality control
Inspection plan from submittal to handover.
01Wool-Blend Upholstery Fabric: identity and source
- Inspection
- Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared.
- Acceptance / hold point
- Documents, labels and physical material all identify the same Wool-Blend Upholstery Fabric construction and source.
02Wool-Blend Upholstery Fabric: control sample
- Inspection
- Natural matte depth, resilient crease recovery and temperature-comforting handle distinguish a genuine wool-rich blend.
- Acceptance / hold point
- Supplier data, label and test report state one matching article and colour.
03Wool-Blend Upholstery Fabric: first-off fabrication
- Inspection
- Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot.
- Acceptance / hold point
- Handled prototype shows no hardening, rings, shrinkage or shade split after approved cleaning.
04Wool-Blend Upholstery Fabric: exposure and care trial
- Inspection
- Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high. Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks.
- Acceptance / hold point
- Approve a wool-safe low-moisture route on an upholstered production sample.
05Wool-Blend Upholstery Fabric: delivery release
- Inspection
- Reject felting, dimensional change, moth damage, seam slippage, shade mixing, pilling or harsh over-finished handle.
- Acceptance / hold point
- Wool-Blend Upholstery Fabric is released only when no stated rejection condition is present and the signed reference remains traceable.
| Stage | Inspection | Acceptance / hold point |
|---|---|---|
| 01Wool-Blend Upholstery Fabric: identity and source | Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared. | Documents, labels and physical material all identify the same Wool-Blend Upholstery Fabric construction and source. |
| 02Wool-Blend Upholstery Fabric: control sample | Natural matte depth, resilient crease recovery and temperature-comforting handle distinguish a genuine wool-rich blend. | Supplier data, label and test report state one matching article and colour. |
| 03Wool-Blend Upholstery Fabric: first-off fabrication | Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot. | Handled prototype shows no hardening, rings, shrinkage or shade split after approved cleaning. |
| 04Wool-Blend Upholstery Fabric: exposure and care trial | Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high. Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks. | Approve a wool-safe low-moisture route on an upholstered production sample. |
| 05Wool-Blend Upholstery Fabric: delivery release | Reject felting, dimensional change, moth damage, seam slippage, shade mixing, pilling or harsh over-finished handle. | Wool-Blend Upholstery Fabric is released only when no stated rejection condition is present and the signed reference remains traceable. |
Required approval evidence
- +Wool-Blend Upholstery Fabric: Identity/source evidence: Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared.
- +Wool-Blend Upholstery Fabric: Signed selection evidence: Supplier data, label and test report state one matching article and colour.
- +Wool-Blend Upholstery Fabric: Second technical gate: Handled prototype shows no hardening, rings, shrinkage or shade split after approved cleaning.
- +Wool-Blend Upholstery Fabric: Factory close-out: Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot.
- +Wool-Blend Upholstery Fabric: Exposure and care record: Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high. Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks.
- +Wool-Blend Upholstery Fabric: Delivery rejection record: Reject felting, dimensional change, moth damage, seam slippage, shade mixing, pilling or harsh over-finished handle.
Questions to close before approval
- 01Wool-Blend Upholstery Fabric: Has the exact identity been declared and evidenced: Wool-rich contract upholstery with exact wool/synthetic percentages, yarn, weave, weight, moth treatment, finish and FR route declared?
- 02Wool-Blend Upholstery Fabric: Which project requirement makes this differentiator necessary: Natural matte depth, resilient crease recovery and temperature-comforting handle distinguish a genuine wool-rich blend?
- 03Wool-Blend Upholstery Fabric: Has the team excluded the non-equivalent route: A wool-look polyester cannot reproduce wool fibre response, moisture buffering, felt risk or repair behaviour?
- 04Wool-Blend Upholstery Fabric: How will the factory prove this execution control: Condition rolls, control steam and tension, stabilise seams and keep all directional panels from one approved lot?
- 05Wool-Blend Upholstery Fabric: Can the project control this GCC exposure: Humidity storage, moth exposure and hot-window UV need controls even when abrasion results are high?
- 06Wool-Blend Upholstery Fabric: Who owns this operating rule after handover: Use low-moisture wool-safe cleaning, prompt blotting and controlled extraction to avoid felting or tide marks?
Material specimen detail
Wool-Blend Upholstery Fabric as a physical material sample.
This specimen view focuses on the surface, edge and construction of Wool-Blend Upholstery Fabric. No furniture product is presented here; the approved physical sample remains the reference for final colour, texture and finish.
Project notes
From sample to production.
01
What to specify
Specify abrasion, cleaning method, flame performance, lightfastness, colourfastness, pilling, width and repeat according to the exact furniture location. “Contract grade” alone is not a complete specification.
02
Fabrication & detailing
Confirm repeat, direction, seam placement, FR interliner and foam compatibility before cutting. High-contact furniture should use replaceable covers or serviceable upholstery details where practical.
03
Colour & finish approval
Colour, texture, pile direction and dye-lot variation are approved from a current cutting. Pattern alignment and railroad suitability are checked against the furniture drawing.
04
Care & maintenance
Vacuum gently and blot spills immediately. Use only the cleaning method approved for the selected fibre and finish; test any agent on a concealed sample first.
Specification note
This page is a preliminary material-specification guide. Current product data, test reports, the physical material sample and the intended application system must be approved for each project before ordering or manufacture.
Related materials