Wall Coverings · Furniture specification
Natural Grasscloth Wallcovering Furniture Specifications
Natural Grasscloth Wallcovering for hotel guestrooms, corridors, lobbies and feature joinery, selected as a complete installed system rather than by surface colour alone.
Current material reference
Natural fibres laminated to paper or non-woven backing
Project-specific system · final build-up must be tested
Material decision summary
Project suitability at a glance.
Treat the finish, substrate, adhesive or subframe, joints and installation method as one tested system.
Best for
- +Guestrooms, corridors, lobbies, feature walls and acoustic zones
- +Projects that can approve a complete installed system
Avoid when
- −Wet cleaning, exact seam invisibility or high-impact corridor use is required
- Traffic level
- Low
- Maintenance
- High
- Visual variation
- High
- Relative budget
- ●●●○
- Suitable environments
- Interior
Material overview
Most requested furniture applications
Select after confirming substrate, fire requirement, cleaning, acoustics, humidity and joint layout. A full installed mock-up is the most reliable approval reference.
Material-specific authority schedule
Ten controls owned by this exact material—not inherited category rows. Final values are confirmed from supplier data, the project sample and shop drawings.
- Declared project reference
- Natural Grasscloth Wallcovering: Natural fibres laminated to paper or non-woven backing
- Exact material identity
- Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared.
- Technical system definition
- A hand-woven natural-fibre wallcovering laminated to paper or non-woven backing. Panel shade, fibre joints and visible seams are intrinsic; moisture, adhesive staining and cleaning are key limitations.
- Selection differentiator
- Visible seams, fibre joins, slubs and panel shading are authentic material characteristics.
- Critical approval decision
- Obtain written acceptance that seams and panel-to-panel shading will remain visible. Grasscloth should not be sold as a seamless uniform wall.
- Non-equivalent substitute
- Vinyl grasscloth-look wallcovering is not equivalent in seams, touch, moisture or cleaning.
- Fabrication focus
- Sequence rolls, keep paste off face and install a three-drop full-height control before area release.
- GCC exposure limit
- Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould.
- Material-specific care rule
- Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic.
- Reject the delivery when
- Reject paste stains, bubbles, mould, mixed lots, crushed fibre, bad seam sequence or variation outside mock-up.
Approval pack
Documents required before ordering.
Project-specific system · final build-up must be tested
- Natural Grasscloth Wallcovering: Identity/source evidence: Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared.
- Natural Grasscloth Wallcovering: Signed selection evidence: Full-height multi-drop mock-up defines the accepted rhythm.
- Natural Grasscloth Wallcovering: Second technical gate: Installer completes compatibility panel on actual prepared substrate.
- Natural Grasscloth Wallcovering: Factory close-out: Sequence rolls, keep paste off face and install a three-drop full-height control before area release.
Lead time & availability
Confirmed after source, finish and quantity selection
Family inspection atlas
A shared visual reference for construction and fabrication.
This atlas is shared by the material family; it is not a microscopy record of this exact selection. The approved sample and current supplier documents govern final colour and construction.
Material identity
What is unique—and what is shared with the family.
The exact material fingerprint comes first. Shared family science is explicitly separated in a collapsible appendix instead of being presented as unique content.
50 material-specific points · 40 shared family references
01 · Material fingerprint
What makes this exact selection technically distinct?
Position in the material family
Natural roll wallcovering
- Reference that must be declared
- Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared.
- Selection differentiator
- Visible seams, fibre joins, slubs and panel shading are authentic material characteristics.
- Not an equivalent substitute
- Vinyl grasscloth-look wallcovering is not equivalent in seams, touch, moisture or cleaning.
- Reject the delivery when
- Reject paste stains, bubbles, mould, mixed lots, crushed fibre, bad seam sequence or variation outside mock-up.
Shared family reference
Open the shared Wall Coverings engineering appendix
This appendix applies to the complete Wall Coverings family. It is retained as supporting reference and is not counted as unique content for this material.
Shared family reference
Open the shared Wall Coverings engineering appendix
This appendix applies to the complete Wall Coverings family. It is retained as supporting reference and is not counted as unique content for this material.
02 · System anatomy
The material is not a single surface.
A hand-woven natural-fibre wallcovering laminated to paper or non-woven backing. Panel shade, fibre joints and visible seams are intrinsic; moisture, adhesive staining and cleaning are key limitations.
01Visible finish
Layer function
Natural fibre, felt, timber flute or mineral topcoat determines appearance, touch and cleanability.
How to verify
Approve a full-height installed finish under final lighting.
02Carrier / panel
Layer function
Backing, acoustic panel, veneered core or reinforced base distributes the finish and controls stability.
How to verify
Declare composition, thickness, density and relevant emissions/fire route.
03Adhesive / subframe
Layer function
Paste, adhesive, clips, battens, rails or mesh connect the finish and can change fire/acoustic behaviour.
How to verify
Shop drawing and test evidence must show the same mounting assembly.
04Building substrate
Layer function
Moisture, flatness, cracks, movement, joints and contamination transfer through the finished system.
How to verify
Complete substrate moisture/flatness hold point before installation.
03 · Decision gates
Reference benchmarks and the project rule.
System identity
01- Reference band
- Face, backing/panel, adhesive/subframe, joints, edge and substrate preparation declared together.
- Project rule
- Face-material data alone is not a system submittal.
- Evidence status
- Complete build-up and installation method
Reaction to fire
02- Reference band
- Project/occupancy-specific and dependent on the complete tested build-up.
- Project rule
- Match face, backing, adhesive, substrate and mounting represented by evidence.
- Evidence status
- Current system test/classification
Acoustic absorption
03- Reference band
- ISO 354 measures reverberation-room absorption of an installed material/assembly.
- Project rule
- State thickness, density, coverage, air gap, backing and mounting; do not quote face felt alone.
- Evidence status
- Test report for matching assembly
Substrate readiness
04- Reference band
- Dry, stable, clean, level and compatible; quantitative moisture/flatness limits come from selected system.
- Project rule
- Record readings and repairs before covering evidence.
- Evidence status
- Substrate inspection sheet
Joint / layout
05- Reference band
- Seam, panel, flute, control-joint and perimeter strategy coordinated on full elevations.
- Project rule
- Never hide building movement joints without an approved system detail.
- Evidence status
- Setting-out drawings and mock-up
Cleaning / impact
06- Reference band
- Scrubbability, stain, edge impact, replaceability and patch visibility are finish specific.
- Project rule
- Trial actual cleaning and a deliberate repair on the mock-up.
- Evidence status
- Clean/impact/repair trial
04 · Family comparison
Four visually related systems that are not technically equivalent.
Natural roll wallcovering
- Best use
- Dry feature walls where fibre, visible seams and handmade variation are desired.
- Trade-off / constraint
- Moisture, paste staining, impact and wet cleaning are constrained.
Acoustic felt panel
- Best use
- Rooms requiring controlled reverberation plus colour and modular replacement.
- Trade-off / constraint
- Performance belongs to tested thickness, air gap, coverage and mounting.
Fluted timber panel
- Best use
- Architectural feature walls integrating grain, rhythm, access and joinery.
- Trade-off / constraint
- Module set-out, substrate, emissions, fire route and movement require coordination.
Seamless mineral finish
- Best use
- Continuous hand-trowelled walls and furniture with controlled tonal movement.
- Trade-off / constraint
- Thin finish cannot bridge substrate cracks, failed waterproofing or movement joints.
Commercial vinyl wallcovering
- Best use
- Guestrooms and corridors requiring repeatable texture, impact resistance and routine cleaning.
- Trade-off / constraint
- Moisture migration, trapped vapour, seam quality, plasticiser and adhesive compatibility remain system risks.
05 · Factory handbook
Hold points from receiving through production release.
Fabrication focus for this exact material
Sequence rolls, keep paste off face and install a three-drop full-height control before area release.
-
01Substrate survey
Control instruction
Record material, moisture, pH where relevant, flatness, cracks, joints, contaminants and repairs.
Close-out evidence
Signed hold-point sheet and photographs
-
02Set-out
Control instruction
Coordinate seams/panels/flutes from one datum around corners, doors, outlets and service panels.
Close-out evidence
Full elevations with numbered modules/drops
-
03Compatibility trial
Control instruction
Apply primer, adhesive/subframe, finish and edge on the actual prepared substrate.
Close-out evidence
Cured trial checked for bond, stain, read-through and removal/repair
-
04Full-height mock-up
Control instruction
Include corner, joint, termination, outlet, impact edge, lighting and deliberate cleaning/repair.
Close-out evidence
Signed minimum/maximum appearance controls
-
05Area release
Control instruction
Sequence batch/roll/panel, protect completed work and stop after first area for inspection.
Close-out evidence
First-area acceptance before repetitive installation
06 · Climate & operations
GCC exposure matrix and maintenance plan.
Material-specific climate warning
Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould.
01Guestroom feature wall
Preferred- Material response
- Controlled use suits most systems if luggage impact, cleaning and replacement are resolved.
- Design control
- Use protected edges and retain matching repair stock.
02Corridor / lobby
Conditional- Material response
- Trolley impact, hand contact, wall washing and fire requirements intensify.
- Design control
- Select contract surface/system and prove impact/cleaning at the mock-up.
03Restaurant
Conditional- Material response
- Food soils, grease aerosols, chair impact and frequent cleaning challenge porous/textural finishes.
- Design control
- Use washable, repairable zones or protective dados at high contact.
04Window / façade wall
Conditional- Material response
- Solar heat and façade condensation can drive movement, fading or concealed moisture.
- Design control
- Investigate envelope moisture and require suitable light/temperature performance.
05Wet area
Avoid- Material response
- Water and vapour attack backing, adhesive, timber core and unsealed joints.
- Design control
- Use only a complete wet-area-approved system over proven waterproofing.
06Exterior / semi-exterior
Avoid- Material response
- Interior wall systems generally lack UV, rain, thermal and wind-load design.
- Design control
- Require a purpose-designed exterior assembly and engineering.
Operational maintenance plan
Material-specific care rule
Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic.
-
01Daily / weekly
Action
Remove surface dust with the approved dry or low-moisture method.
Prohibited
No wet wiping on natural fibre or unapproved felt/wood.
-
02After a mark
Action
Identify finish and soil, then use the specific spot-clean or touch-up route.
Prohibited
No aggressive rubbing that polishes, frays or burnishes texture.
-
03Monthly
Action
Inspect seams, corners, edges, impact zones, bubbles, cracks, moisture and loose modules.
Prohibited
Do not close or paint over unexplained moisture.
-
04Periodic deep clean
Action
Use only the manufacturer-approved system and test on a retained/hidden sample.
Prohibited
No generic steam or extraction cleaning.
-
05Repair / replacement
Action
Replace complete drops/modules where practical or reproduce the recorded layered repair method.
Prohibited
Do not promise invisible patches on natural or hand-applied finishes.
07 · Reference library
The language that governs the decision—and where it comes from.
Material glossary
- 01Substrate
- The wall or supporting surface receiving the finish system.
- 02Drop
- One full-height length of roll wallcovering.
- 03NRC / αw
- Single-number acoustic absorption ratings derived under defined test and assembly conditions.
- 04Air gap
- Space behind an acoustic panel that can materially change absorption performance.
- 05Read-through
- Visible transfer of joints, defects, adhesive or substrate texture through the finish.
Professional and standards sources
- 01
ISO
ISO 354 acoustic absorption
Reverberation-room method for wall/ceiling materials and complete assemblies.
Open primary source ↗ - 02
BSI
BS EN 15102 decorative wallcoverings
Roll-wallcovering characteristics including fire and dangerous-substance declarations.
Open primary source ↗ - 03
Wallcoverings Association
Wallcovering quality standards
Industry attributes including strength, tear, fire, UV, stain and scrubbability.
Open primary source ↗ - 04
Wallcoverings Association
Standard installation guidance
Roll/lot control, panel sequence, adhesive, seams, lighting and stop-work checks.
Open primary source ↗
Material-specific technical dossier
Natural Grasscloth Wallcovering controls from decision to production.
Every row below is tied to this material’s identity, differentiator, fabrication, exposure or care route; no generic family rows are included in this dossier.
8 unique controls · 4 contextual test applications · 5 material-specific risks
System definition
A hand-woven natural-fibre wallcovering laminated to paper or non-woven backing. Panel shade, fibre joints and visible seams are intrinsic; moisture, adhesive staining and cleaning are key limitations.
Critical decision
Obtain written acceptance that seams and panel-to-panel shading will remain visible. Grasscloth should not be sold as a seamless uniform wall.
01 · Selection variables
What the material schedule must lock.
01Natural Grasscloth Wallcovering: Natural panel variation
- What must be declared
- Fibre colour, slubs, knots, horizontal joins, panel shading and reverse-hang policy
- Approval basis
- Full-height multi-drop mock-up defines the accepted rhythm.
02Natural Grasscloth Wallcovering: Adhesive/moisture route
- What must be declared
- Backing, primer, clear adhesive, paste staining, edge curl and humidity limitations
- Approval basis
- Installer completes compatibility panel on actual prepared substrate.
03Natural Grasscloth Wallcovering: identity declaration
- What must be declared
- Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared.
- Approval basis
- Obtain written acceptance that seams and panel-to-panel shading will remain visible. Grasscloth should not be sold as a seamless uniform wall.
04Natural Grasscloth Wallcovering: equivalency boundary
- What must be declared
- Visible seams, fibre joins, slubs and panel shading are authentic material characteristics.
- Approval basis
- Vinyl grasscloth-look wallcovering is not equivalent in seams, touch, moisture or cleaning.
05Natural Grasscloth Wallcovering: factory execution
- What must be declared
- Sequence rolls, keep paste off face and install a three-drop full-height control before area release.
- Approval basis
- Full-height multi-drop mock-up defines the accepted rhythm.
06Natural Grasscloth Wallcovering: GCC exposure control
- What must be declared
- Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould.
- Approval basis
- Release only when the project detail and maintenance route close this exact exposure risk for Natural Grasscloth Wallcovering.
07Natural Grasscloth Wallcovering: operational care route
- What must be declared
- Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic.
- Approval basis
- Issue a named cleaning and repair method for Natural Grasscloth Wallcovering; generic family care is not approval.
08Natural Grasscloth Wallcovering: delivery rejection boundary
- What must be declared
- Reject paste stains, bubbles, mould, mixed lots, crushed fibre, bad seam sequence or variation outside mock-up.
- Approval basis
- The signed sample, first-off item and delivery inspection must all close this rejection condition for Natural Grasscloth Wallcovering.
| Variable | What must be declared | Approval basis |
|---|---|---|
| 01Natural Grasscloth Wallcovering: Natural panel variation | Fibre colour, slubs, knots, horizontal joins, panel shading and reverse-hang policy | Full-height multi-drop mock-up defines the accepted rhythm. |
| 02Natural Grasscloth Wallcovering: Adhesive/moisture route | Backing, primer, clear adhesive, paste staining, edge curl and humidity limitations | Installer completes compatibility panel on actual prepared substrate. |
| 03Natural Grasscloth Wallcovering: identity declaration | Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared. | Obtain written acceptance that seams and panel-to-panel shading will remain visible. Grasscloth should not be sold as a seamless uniform wall. |
| 04Natural Grasscloth Wallcovering: equivalency boundary | Visible seams, fibre joins, slubs and panel shading are authentic material characteristics. | Vinyl grasscloth-look wallcovering is not equivalent in seams, touch, moisture or cleaning. |
| 05Natural Grasscloth Wallcovering: factory execution | Sequence rolls, keep paste off face and install a three-drop full-height control before area release. | Full-height multi-drop mock-up defines the accepted rhythm. |
| 06Natural Grasscloth Wallcovering: GCC exposure control | Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould. | Release only when the project detail and maintenance route close this exact exposure risk for Natural Grasscloth Wallcovering. |
| 07Natural Grasscloth Wallcovering: operational care route | Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic. | Issue a named cleaning and repair method for Natural Grasscloth Wallcovering; generic family care is not approval. |
| 08Natural Grasscloth Wallcovering: delivery rejection boundary | Reject paste stains, bubbles, mould, mixed lots, crushed fibre, bad seam sequence or variation outside mock-up. | The signed sample, first-off item and delivery inspection must all close this rejection condition for Natural Grasscloth Wallcovering. |
02 · Verification
Test and evidence matrix.
Test methods are not compliance certificates or automatic pass values. The project must state the method, required result, tested construction and current report it will accept.
BS EN 15102:2019
01- What it measures
- Product requirements for decorative wallcoverings in roll form.
- How to use it here
- Apply to relevant roll wallcoverings and review fire, substance, durability and declared characteristics for the actual product. Material-specific acceptance for Natural Grasscloth Wallcovering: Full-height multi-drop mock-up defines the accepted rhythm.
ISO 354:2003
02- What it measures
- Reverberation-room measurement of sound absorption for wall/ceiling treatments.
- How to use it here
- Acoustic claim belongs to the tested assembly, area and mounting—not the face material alone. Material-specific acceptance for Natural Grasscloth Wallcovering: Installer completes compatibility panel on actual prepared substrate.
Project reaction-to-fire route
03- What it measures
- Classification/test evidence for the complete installed wall system.
- How to use it here
- Match product, substrate, adhesive, subframe/air gap and end-use orientation. Material-specific acceptance for Natural Grasscloth Wallcovering: Use trained installer, clean process, dry locations and approved dry-clean/spot protocol.
Installed project mock-up
04- What it measures
- Visual, dimensional, cleanability and repair verification in real substrate and lighting.
- How to use it here
- Include a corner, seam/joint, opening, termination and representative cleaning test. Material-specific acceptance for Natural Grasscloth Wallcovering: Sequence rolls, keep paste off face and install a three-drop full-height control before area release.
03 · Performance
Failure-mode and control register.
01Natural Grasscloth Wallcovering: Seams, paste stains and tide marks dominate
- Likely cause
- Natural fibres/backing absorb moisture unevenly and cannot be wet-cleaned like vinyl.
- Preventive control
- Use trained installer, clean process, dry locations and approved dry-clean/spot protocol.
02Natural Grasscloth Wallcovering: non-equivalent substitution accepted
- Likely cause
- Vinyl grasscloth-look wallcovering is not equivalent in seams, touch, moisture or cleaning.
- Preventive control
- Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared.
03Natural Grasscloth Wallcovering: material signature lost in fabrication
- Likely cause
- The workshop route does not implement the material-specific fabrication focus: Sequence rolls, keep paste off face and install a three-drop full-height control before area release.
- Preventive control
- Installer completes compatibility panel on actual prepared substrate.
04Natural Grasscloth Wallcovering: GCC exposure mismatch
- Likely cause
- Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould.
- Preventive control
- Re-detail, relocate or reject Natural Grasscloth Wallcovering where the stated exposure cannot be controlled.
05Natural Grasscloth Wallcovering: cleaning or maintenance damage
- Likely cause
- Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic.
- Preventive control
- Train operations on the named care route and retain a signed repair reference for Natural Grasscloth Wallcovering.
| Failure mode | Likely cause | Preventive control |
|---|---|---|
| 01Natural Grasscloth Wallcovering: Seams, paste stains and tide marks dominate | Natural fibres/backing absorb moisture unevenly and cannot be wet-cleaned like vinyl. | Use trained installer, clean process, dry locations and approved dry-clean/spot protocol. |
| 02Natural Grasscloth Wallcovering: non-equivalent substitution accepted | Vinyl grasscloth-look wallcovering is not equivalent in seams, touch, moisture or cleaning. | Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared. |
| 03Natural Grasscloth Wallcovering: material signature lost in fabrication | The workshop route does not implement the material-specific fabrication focus: Sequence rolls, keep paste off face and install a three-drop full-height control before area release. | Installer completes compatibility panel on actual prepared substrate. |
| 04Natural Grasscloth Wallcovering: GCC exposure mismatch | Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould. | Re-detail, relocate or reject Natural Grasscloth Wallcovering where the stated exposure cannot be controlled. |
| 05Natural Grasscloth Wallcovering: cleaning or maintenance damage | Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic. | Train operations on the named care route and retain a signed repair reference for Natural Grasscloth Wallcovering. |
04 · Tender-ready
Copy-ready specification clause.
Provide natural hand-woven grasscloth on the approved backing for dry, low-impact interior locations. Submit fibre/backing composition, roll width/length, batch, hanging direction, substrate/primer/adhesive method, reaction-to-fire evidence where required and dry-care instructions. Approval requires a full-height minimum three-drop installed mock-up showing seams, fibre joins and shade variation. Wet cleaning, invisible seams and exact panel uniformity shall not be promised.
05 · Quality control
Inspection plan from submittal to handover.
01Natural Grasscloth Wallcovering: identity and source
- Inspection
- Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared.
- Acceptance / hold point
- Documents, labels and physical material all identify the same Natural Grasscloth Wallcovering construction and source.
02Natural Grasscloth Wallcovering: control sample
- Inspection
- Visible seams, fibre joins, slubs and panel shading are authentic material characteristics.
- Acceptance / hold point
- Full-height multi-drop mock-up defines the accepted rhythm.
03Natural Grasscloth Wallcovering: first-off fabrication
- Inspection
- Sequence rolls, keep paste off face and install a three-drop full-height control before area release.
- Acceptance / hold point
- Installer completes compatibility panel on actual prepared substrate.
04Natural Grasscloth Wallcovering: exposure and care trial
- Inspection
- Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould. Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic.
- Acceptance / hold point
- Use trained installer, clean process, dry locations and approved dry-clean/spot protocol.
05Natural Grasscloth Wallcovering: delivery release
- Inspection
- Reject paste stains, bubbles, mould, mixed lots, crushed fibre, bad seam sequence or variation outside mock-up.
- Acceptance / hold point
- Natural Grasscloth Wallcovering is released only when no stated rejection condition is present and the signed reference remains traceable.
| Stage | Inspection | Acceptance / hold point |
|---|---|---|
| 01Natural Grasscloth Wallcovering: identity and source | Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared. | Documents, labels and physical material all identify the same Natural Grasscloth Wallcovering construction and source. |
| 02Natural Grasscloth Wallcovering: control sample | Visible seams, fibre joins, slubs and panel shading are authentic material characteristics. | Full-height multi-drop mock-up defines the accepted rhythm. |
| 03Natural Grasscloth Wallcovering: first-off fabrication | Sequence rolls, keep paste off face and install a three-drop full-height control before area release. | Installer completes compatibility panel on actual prepared substrate. |
| 04Natural Grasscloth Wallcovering: exposure and care trial | Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould. Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic. | Use trained installer, clean process, dry locations and approved dry-clean/spot protocol. |
| 05Natural Grasscloth Wallcovering: delivery release | Reject paste stains, bubbles, mould, mixed lots, crushed fibre, bad seam sequence or variation outside mock-up. | Natural Grasscloth Wallcovering is released only when no stated rejection condition is present and the signed reference remains traceable. |
Required approval evidence
- +Natural Grasscloth Wallcovering: Identity/source evidence: Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared.
- +Natural Grasscloth Wallcovering: Signed selection evidence: Full-height multi-drop mock-up defines the accepted rhythm.
- +Natural Grasscloth Wallcovering: Second technical gate: Installer completes compatibility panel on actual prepared substrate.
- +Natural Grasscloth Wallcovering: Factory close-out: Sequence rolls, keep paste off face and install a three-drop full-height control before area release.
- +Natural Grasscloth Wallcovering: Exposure and care record: Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould. Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic.
- +Natural Grasscloth Wallcovering: Delivery rejection record: Reject paste stains, bubbles, mould, mixed lots, crushed fibre, bad seam sequence or variation outside mock-up.
Questions to close before approval
- 01Natural Grasscloth Wallcovering: Has the exact identity been declared and evidenced: Hand-woven natural-fibre grasscloth laminated to paper/non-woven backing; fibre, roll, lot and hanging direction declared?
- 02Natural Grasscloth Wallcovering: Which project requirement makes this differentiator necessary: Visible seams, fibre joins, slubs and panel shading are authentic material characteristics?
- 03Natural Grasscloth Wallcovering: Has the team excluded the non-equivalent route: Vinyl grasscloth-look wallcovering is not equivalent in seams, touch, moisture or cleaning?
- 04Natural Grasscloth Wallcovering: How will the factory prove this execution control: Sequence rolls, keep paste off face and install a three-drop full-height control before area release?
- 05Natural Grasscloth Wallcovering: Can the project control this GCC exposure: Avoid damp walls and uncontrolled façade condensation; natural fibre can stain, slacken or support mould?
- 06Natural Grasscloth Wallcovering: Who owns this operating rule after handover: Dry dust only unless the exact supplier permits spot treatment; invisible repair is unrealistic?
Exact material application
Natural Grasscloth Wallcovering on a dedicated furniture product.
This material-specific application image shows Natural Grasscloth Wallcovering on its own product and is not reused by any other material page. Final colour, pattern and finish remain subject to the approved physical sample.
Project notes
From sample to production.
01
What to specify
Select after confirming substrate, fire requirement, cleaning, acoustics, humidity and joint layout. A full installed mock-up is the most reliable approval reference.
02
Fabrication & detailing
Survey substrates and coordinate setting-out with doors, outlets, lighting and joinery. Complete a mock-up before bulk installation and protect finished work from following trades.
03
Colour & finish approval
Wall finishes are approved as installed mock-ups because lighting, substrate, panel joints and hand application materially change the final appearance.
04
Care & maintenance
Follow the approved maintenance guide for the selected system. Dust or spot-clean gently; repair test areas first so colour, sheen and texture remain consistent.
Specification note
This page is a preliminary specification guide. No value, brand reference or material name constitutes automatic compliance. Current product data, test reports, physical sample or slab and the furniture construction must be approved for each project before ordering or manufacture.
Related materials