Wall Coverings · Furniture specification
Acoustic Felt Wall Panels Furniture Specifications
Acoustic Felt Wall Panels for hotel guestrooms, corridors, lobbies and feature joinery, selected as a complete installed system rather than by surface colour alone.
Current material reference
100% PES reference; NRC and FR performance by current tested assembly
Project-specific system · final build-up must be tested
Material decision summary
Project suitability at a glance.
Treat the finish, substrate, adhesive or subframe, joints and installation method as one tested system.
Best for
- +Wrapped or panelled acoustic zones with assembly-level NRC and fire data
Avoid when
- −Substrate, joints, fire data and cleaning access are unresolved
- Traffic level
- Medium
- Maintenance
- Low
- Visual variation
- Low
- Relative budget
- ●●○○
- Suitable environments
- Interior · High traffic
Material overview
Most requested furniture applications
Select after confirming substrate, fire requirement, cleaning, acoustics, humidity and joint layout. A full installed mock-up is the most reliable approval reference.
Material-specific authority schedule
Ten controls owned by this exact material—not inherited category rows. Final values are confirmed from supplier data, the project sample and shop drawings.
- Declared project reference
- Acoustic Felt Wall Panels: 100% PES reference; NRC and FR performance by current tested assembly
- Exact material identity
- Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared.
- Technical system definition
- A polyester felt acoustic panel system whose absorption comes from the tested panel thickness, density, coverage, air cavity/backing and mounting—not from “felt” alone.
- Selection differentiator
- Modular colour and sound absorption can combine when the installed assembly matches the tested build.
- Critical approval decision
- Specify the tested assembly and required room outcome. NRC or αw from a different thickness, air gap or mounting is not transferable.
- Non-equivalent substitute
- Same-colour felt at different density/thickness or mounting is not acoustically equivalent.
- Fabrication focus
- Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access.
- GCC exposure limit
- Control façade moisture, dust and high-contact edge damage; verify light and fire performance.
- Material-specific care rule
- Vacuum with soft attachment, spot test and replace modules rather than over-wetting.
- Reject the delivery when
- Reject wrong density/thickness, reduced coverage, omitted cavity, fuzzy edges, colour drift or unsupported NRC/αw.
Approval pack
Documents required before ordering.
Project-specific system · final build-up must be tested
- Acoustic Felt Wall Panels: Identity/source evidence: Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared.
- Acoustic Felt Wall Panels: Signed selection evidence: Test report and shop drawing show the same build.
- Acoustic Felt Wall Panels: Second technical gate: Mock-up includes high-contact edge and demonstrated clean/replace process.
- Acoustic Felt Wall Panels: Factory close-out: Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access.
Lead time & availability
Confirmed after source, finish and quantity selection
Family inspection atlas
A shared visual reference for construction and fabrication.
This atlas is shared by the material family; it is not a microscopy record of this exact selection. The approved sample and current supplier documents govern final colour and construction.
Material identity
What is unique—and what is shared with the family.
The exact material fingerprint comes first. Shared family science is explicitly separated in a collapsible appendix instead of being presented as unique content.
50 material-specific points · 40 shared family references
01 · Material fingerprint
What makes this exact selection technically distinct?
Position in the material family
Acoustic felt panel
- Reference that must be declared
- Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared.
- Selection differentiator
- Modular colour and sound absorption can combine when the installed assembly matches the tested build.
- Not an equivalent substitute
- Same-colour felt at different density/thickness or mounting is not acoustically equivalent.
- Reject the delivery when
- Reject wrong density/thickness, reduced coverage, omitted cavity, fuzzy edges, colour drift or unsupported NRC/αw.
Shared family reference
Open the shared Wall Coverings engineering appendix
This appendix applies to the complete Wall Coverings family. It is retained as supporting reference and is not counted as unique content for this material.
Shared family reference
Open the shared Wall Coverings engineering appendix
This appendix applies to the complete Wall Coverings family. It is retained as supporting reference and is not counted as unique content for this material.
02 · System anatomy
The material is not a single surface.
A polyester felt acoustic panel system whose absorption comes from the tested panel thickness, density, coverage, air cavity/backing and mounting—not from “felt” alone.
01Visible finish
Layer function
Natural fibre, felt, timber flute or mineral topcoat determines appearance, touch and cleanability.
How to verify
Approve a full-height installed finish under final lighting.
02Carrier / panel
Layer function
Backing, acoustic panel, veneered core or reinforced base distributes the finish and controls stability.
How to verify
Declare composition, thickness, density and relevant emissions/fire route.
03Adhesive / subframe
Layer function
Paste, adhesive, clips, battens, rails or mesh connect the finish and can change fire/acoustic behaviour.
How to verify
Shop drawing and test evidence must show the same mounting assembly.
04Building substrate
Layer function
Moisture, flatness, cracks, movement, joints and contamination transfer through the finished system.
How to verify
Complete substrate moisture/flatness hold point before installation.
03 · Decision gates
Reference benchmarks and the project rule.
System identity
01- Reference band
- Face, backing/panel, adhesive/subframe, joints, edge and substrate preparation declared together.
- Project rule
- Face-material data alone is not a system submittal.
- Evidence status
- Complete build-up and installation method
Reaction to fire
02- Reference band
- Project/occupancy-specific and dependent on the complete tested build-up.
- Project rule
- Match face, backing, adhesive, substrate and mounting represented by evidence.
- Evidence status
- Current system test/classification
Acoustic absorption
03- Reference band
- ISO 354 measures reverberation-room absorption of an installed material/assembly.
- Project rule
- State thickness, density, coverage, air gap, backing and mounting; do not quote face felt alone.
- Evidence status
- Test report for matching assembly
Substrate readiness
04- Reference band
- Dry, stable, clean, level and compatible; quantitative moisture/flatness limits come from selected system.
- Project rule
- Record readings and repairs before covering evidence.
- Evidence status
- Substrate inspection sheet
Joint / layout
05- Reference band
- Seam, panel, flute, control-joint and perimeter strategy coordinated on full elevations.
- Project rule
- Never hide building movement joints without an approved system detail.
- Evidence status
- Setting-out drawings and mock-up
Cleaning / impact
06- Reference band
- Scrubbability, stain, edge impact, replaceability and patch visibility are finish specific.
- Project rule
- Trial actual cleaning and a deliberate repair on the mock-up.
- Evidence status
- Clean/impact/repair trial
04 · Family comparison
Four visually related systems that are not technically equivalent.
Natural roll wallcovering
- Best use
- Dry feature walls where fibre, visible seams and handmade variation are desired.
- Trade-off / constraint
- Moisture, paste staining, impact and wet cleaning are constrained.
Acoustic felt panel
- Best use
- Rooms requiring controlled reverberation plus colour and modular replacement.
- Trade-off / constraint
- Performance belongs to tested thickness, air gap, coverage and mounting.
Fluted timber panel
- Best use
- Architectural feature walls integrating grain, rhythm, access and joinery.
- Trade-off / constraint
- Module set-out, substrate, emissions, fire route and movement require coordination.
Seamless mineral finish
- Best use
- Continuous hand-trowelled walls and furniture with controlled tonal movement.
- Trade-off / constraint
- Thin finish cannot bridge substrate cracks, failed waterproofing or movement joints.
Commercial vinyl wallcovering
- Best use
- Guestrooms and corridors requiring repeatable texture, impact resistance and routine cleaning.
- Trade-off / constraint
- Moisture migration, trapped vapour, seam quality, plasticiser and adhesive compatibility remain system risks.
05 · Factory handbook
Hold points from receiving through production release.
Fabrication focus for this exact material
Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access.
-
01Substrate survey
Control instruction
Record material, moisture, pH where relevant, flatness, cracks, joints, contaminants and repairs.
Close-out evidence
Signed hold-point sheet and photographs
-
02Set-out
Control instruction
Coordinate seams/panels/flutes from one datum around corners, doors, outlets and service panels.
Close-out evidence
Full elevations with numbered modules/drops
-
03Compatibility trial
Control instruction
Apply primer, adhesive/subframe, finish and edge on the actual prepared substrate.
Close-out evidence
Cured trial checked for bond, stain, read-through and removal/repair
-
04Full-height mock-up
Control instruction
Include corner, joint, termination, outlet, impact edge, lighting and deliberate cleaning/repair.
Close-out evidence
Signed minimum/maximum appearance controls
-
05Area release
Control instruction
Sequence batch/roll/panel, protect completed work and stop after first area for inspection.
Close-out evidence
First-area acceptance before repetitive installation
06 · Climate & operations
GCC exposure matrix and maintenance plan.
Material-specific climate warning
Control façade moisture, dust and high-contact edge damage; verify light and fire performance.
01Guestroom feature wall
Preferred- Material response
- Controlled use suits most systems if luggage impact, cleaning and replacement are resolved.
- Design control
- Use protected edges and retain matching repair stock.
02Corridor / lobby
Conditional- Material response
- Trolley impact, hand contact, wall washing and fire requirements intensify.
- Design control
- Select contract surface/system and prove impact/cleaning at the mock-up.
03Restaurant
Conditional- Material response
- Food soils, grease aerosols, chair impact and frequent cleaning challenge porous/textural finishes.
- Design control
- Use washable, repairable zones or protective dados at high contact.
04Window / façade wall
Conditional- Material response
- Solar heat and façade condensation can drive movement, fading or concealed moisture.
- Design control
- Investigate envelope moisture and require suitable light/temperature performance.
05Wet area
Avoid- Material response
- Water and vapour attack backing, adhesive, timber core and unsealed joints.
- Design control
- Use only a complete wet-area-approved system over proven waterproofing.
06Exterior / semi-exterior
Avoid- Material response
- Interior wall systems generally lack UV, rain, thermal and wind-load design.
- Design control
- Require a purpose-designed exterior assembly and engineering.
Operational maintenance plan
Material-specific care rule
Vacuum with soft attachment, spot test and replace modules rather than over-wetting.
-
01Daily / weekly
Action
Remove surface dust with the approved dry or low-moisture method.
Prohibited
No wet wiping on natural fibre or unapproved felt/wood.
-
02After a mark
Action
Identify finish and soil, then use the specific spot-clean or touch-up route.
Prohibited
No aggressive rubbing that polishes, frays or burnishes texture.
-
03Monthly
Action
Inspect seams, corners, edges, impact zones, bubbles, cracks, moisture and loose modules.
Prohibited
Do not close or paint over unexplained moisture.
-
04Periodic deep clean
Action
Use only the manufacturer-approved system and test on a retained/hidden sample.
Prohibited
No generic steam or extraction cleaning.
-
05Repair / replacement
Action
Replace complete drops/modules where practical or reproduce the recorded layered repair method.
Prohibited
Do not promise invisible patches on natural or hand-applied finishes.
07 · Reference library
The language that governs the decision—and where it comes from.
Material glossary
- 01Substrate
- The wall or supporting surface receiving the finish system.
- 02Drop
- One full-height length of roll wallcovering.
- 03NRC / αw
- Single-number acoustic absorption ratings derived under defined test and assembly conditions.
- 04Air gap
- Space behind an acoustic panel that can materially change absorption performance.
- 05Read-through
- Visible transfer of joints, defects, adhesive or substrate texture through the finish.
Professional and standards sources
- 01
ISO
ISO 354 acoustic absorption
Reverberation-room method for wall/ceiling materials and complete assemblies.
Open primary source ↗ - 02
BSI
BS EN 15102 decorative wallcoverings
Roll-wallcovering characteristics including fire and dangerous-substance declarations.
Open primary source ↗ - 03
Wallcoverings Association
Wallcovering quality standards
Industry attributes including strength, tear, fire, UV, stain and scrubbability.
Open primary source ↗ - 04
Wallcoverings Association
Standard installation guidance
Roll/lot control, panel sequence, adhesive, seams, lighting and stop-work checks.
Open primary source ↗
Material-specific technical dossier
Acoustic Felt Wall Panels controls from decision to production.
Every row below is tied to this material’s identity, differentiator, fabrication, exposure or care route; no generic family rows are included in this dossier.
8 unique controls · 4 contextual test applications · 5 material-specific risks
System definition
A polyester felt acoustic panel system whose absorption comes from the tested panel thickness, density, coverage, air cavity/backing and mounting—not from “felt” alone.
Critical decision
Specify the tested assembly and required room outcome. NRC or αw from a different thickness, air gap or mounting is not transferable.
01 · Selection variables
What the material schedule must lock.
01Acoustic Felt Wall Panels: Acoustic assembly
- What must be declared
- Panel thickness/density, perforation/shape, coverage, backing, air gap and mounting
- Approval basis
- Test report and shop drawing show the same build.
02Acoustic Felt Wall Panels: Panel durability
- What must be declared
- Edge fuzz, impact/dent recovery, colourfastness, cleaning and replacement modules
- Approval basis
- Mock-up includes high-contact edge and demonstrated clean/replace process.
03Acoustic Felt Wall Panels: identity declaration
- What must be declared
- Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared.
- Approval basis
- Specify the tested assembly and required room outcome. NRC or αw from a different thickness, air gap or mounting is not transferable.
04Acoustic Felt Wall Panels: equivalency boundary
- What must be declared
- Modular colour and sound absorption can combine when the installed assembly matches the tested build.
- Approval basis
- Same-colour felt at different density/thickness or mounting is not acoustically equivalent.
05Acoustic Felt Wall Panels: factory execution
- What must be declared
- Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access.
- Approval basis
- Test report and shop drawing show the same build.
06Acoustic Felt Wall Panels: GCC exposure control
- What must be declared
- Control façade moisture, dust and high-contact edge damage; verify light and fire performance.
- Approval basis
- Release only when the project detail and maintenance route close this exact exposure risk for Acoustic Felt Wall Panels.
07Acoustic Felt Wall Panels: operational care route
- What must be declared
- Vacuum with soft attachment, spot test and replace modules rather than over-wetting.
- Approval basis
- Issue a named cleaning and repair method for Acoustic Felt Wall Panels; generic family care is not approval.
08Acoustic Felt Wall Panels: delivery rejection boundary
- What must be declared
- Reject wrong density/thickness, reduced coverage, omitted cavity, fuzzy edges, colour drift or unsupported NRC/αw.
- Approval basis
- The signed sample, first-off item and delivery inspection must all close this rejection condition for Acoustic Felt Wall Panels.
| Variable | What must be declared | Approval basis |
|---|---|---|
| 01Acoustic Felt Wall Panels: Acoustic assembly | Panel thickness/density, perforation/shape, coverage, backing, air gap and mounting | Test report and shop drawing show the same build. |
| 02Acoustic Felt Wall Panels: Panel durability | Edge fuzz, impact/dent recovery, colourfastness, cleaning and replacement modules | Mock-up includes high-contact edge and demonstrated clean/replace process. |
| 03Acoustic Felt Wall Panels: identity declaration | Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared. | Specify the tested assembly and required room outcome. NRC or αw from a different thickness, air gap or mounting is not transferable. |
| 04Acoustic Felt Wall Panels: equivalency boundary | Modular colour and sound absorption can combine when the installed assembly matches the tested build. | Same-colour felt at different density/thickness or mounting is not acoustically equivalent. |
| 05Acoustic Felt Wall Panels: factory execution | Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access. | Test report and shop drawing show the same build. |
| 06Acoustic Felt Wall Panels: GCC exposure control | Control façade moisture, dust and high-contact edge damage; verify light and fire performance. | Release only when the project detail and maintenance route close this exact exposure risk for Acoustic Felt Wall Panels. |
| 07Acoustic Felt Wall Panels: operational care route | Vacuum with soft attachment, spot test and replace modules rather than over-wetting. | Issue a named cleaning and repair method for Acoustic Felt Wall Panels; generic family care is not approval. |
| 08Acoustic Felt Wall Panels: delivery rejection boundary | Reject wrong density/thickness, reduced coverage, omitted cavity, fuzzy edges, colour drift or unsupported NRC/αw. | The signed sample, first-off item and delivery inspection must all close this rejection condition for Acoustic Felt Wall Panels. |
02 · Verification
Test and evidence matrix.
Test methods are not compliance certificates or automatic pass values. The project must state the method, required result, tested construction and current report it will accept.
BS EN 15102:2019
01- What it measures
- Product requirements for decorative wallcoverings in roll form.
- How to use it here
- Apply to relevant roll wallcoverings and review fire, substance, durability and declared characteristics for the actual product. Material-specific acceptance for Acoustic Felt Wall Panels: Test report and shop drawing show the same build.
ISO 354:2003
02- What it measures
- Reverberation-room measurement of sound absorption for wall/ceiling treatments.
- How to use it here
- Acoustic claim belongs to the tested assembly, area and mounting—not the face material alone. Material-specific acceptance for Acoustic Felt Wall Panels: Mock-up includes high-contact edge and demonstrated clean/replace process.
Project reaction-to-fire route
03- What it measures
- Classification/test evidence for the complete installed wall system.
- How to use it here
- Match product, substrate, adhesive, subframe/air gap and end-use orientation. Material-specific acceptance for Acoustic Felt Wall Panels: Freeze assembly and inspect concealed backing/coverage before closure.
Installed project mock-up
04- What it measures
- Visual, dimensional, cleanability and repair verification in real substrate and lighting.
- How to use it here
- Include a corner, seam/joint, opening, termination and representative cleaning test. Material-specific acceptance for Acoustic Felt Wall Panels: Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access.
03 · Performance
Failure-mode and control register.
01Acoustic Felt Wall Panels: Installed acoustics underperform report
- Likely cause
- Site omits air gap/backing, changes thickness or reduces coverage.
- Preventive control
- Freeze assembly and inspect concealed backing/coverage before closure.
02Acoustic Felt Wall Panels: non-equivalent substitution accepted
- Likely cause
- Same-colour felt at different density/thickness or mounting is not acoustically equivalent.
- Preventive control
- Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared.
03Acoustic Felt Wall Panels: material signature lost in fabrication
- Likely cause
- The workshop route does not implement the material-specific fabrication focus: Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access.
- Preventive control
- Mock-up includes high-contact edge and demonstrated clean/replace process.
04Acoustic Felt Wall Panels: GCC exposure mismatch
- Likely cause
- Control façade moisture, dust and high-contact edge damage; verify light and fire performance.
- Preventive control
- Re-detail, relocate or reject Acoustic Felt Wall Panels where the stated exposure cannot be controlled.
05Acoustic Felt Wall Panels: cleaning or maintenance damage
- Likely cause
- Vacuum with soft attachment, spot test and replace modules rather than over-wetting.
- Preventive control
- Train operations on the named care route and retain a signed repair reference for Acoustic Felt Wall Panels.
| Failure mode | Likely cause | Preventive control |
|---|---|---|
| 01Acoustic Felt Wall Panels: Installed acoustics underperform report | Site omits air gap/backing, changes thickness or reduces coverage. | Freeze assembly and inspect concealed backing/coverage before closure. |
| 02Acoustic Felt Wall Panels: non-equivalent substitution accepted | Same-colour felt at different density/thickness or mounting is not acoustically equivalent. | Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared. |
| 03Acoustic Felt Wall Panels: material signature lost in fabrication | The workshop route does not implement the material-specific fabrication focus: Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access. | Mock-up includes high-contact edge and demonstrated clean/replace process. |
| 04Acoustic Felt Wall Panels: GCC exposure mismatch | Control façade moisture, dust and high-contact edge damage; verify light and fire performance. | Re-detail, relocate or reject Acoustic Felt Wall Panels where the stated exposure cannot be controlled. |
| 05Acoustic Felt Wall Panels: cleaning or maintenance damage | Vacuum with soft attachment, spot test and replace modules rather than over-wetting. | Train operations on the named care route and retain a signed repair reference for Acoustic Felt Wall Panels. |
04 · Tender-ready
Copy-ready specification clause.
Provide polyester acoustic felt wall panels as a complete tested assembly. Declare fibre/recycled content if claimed, panel density/thickness, dimensions, colour, edge finish, backing/subframe, air gap, coverage and mounting. Submit ISO 354 test evidence for the same assembly plus applicable reaction-to-fire evidence. Shop drawings shall calculate installed coverage and coordinate joints/edges. Approve a full-height mock-up including impact edge, cleaning and replaceable module; face-felt data alone is not equivalent.
05 · Quality control
Inspection plan from submittal to handover.
01Acoustic Felt Wall Panels: identity and source
- Inspection
- Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared.
- Acceptance / hold point
- Documents, labels and physical material all identify the same Acoustic Felt Wall Panels construction and source.
02Acoustic Felt Wall Panels: control sample
- Inspection
- Modular colour and sound absorption can combine when the installed assembly matches the tested build.
- Acceptance / hold point
- Test report and shop drawing show the same build.
03Acoustic Felt Wall Panels: first-off fabrication
- Inspection
- Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access.
- Acceptance / hold point
- Mock-up includes high-contact edge and demonstrated clean/replace process.
04Acoustic Felt Wall Panels: exposure and care trial
- Inspection
- Control façade moisture, dust and high-contact edge damage; verify light and fire performance. Vacuum with soft attachment, spot test and replace modules rather than over-wetting.
- Acceptance / hold point
- Freeze assembly and inspect concealed backing/coverage before closure.
05Acoustic Felt Wall Panels: delivery release
- Inspection
- Reject wrong density/thickness, reduced coverage, omitted cavity, fuzzy edges, colour drift or unsupported NRC/αw.
- Acceptance / hold point
- Acoustic Felt Wall Panels is released only when no stated rejection condition is present and the signed reference remains traceable.
| Stage | Inspection | Acceptance / hold point |
|---|---|---|
| 01Acoustic Felt Wall Panels: identity and source | Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared. | Documents, labels and physical material all identify the same Acoustic Felt Wall Panels construction and source. |
| 02Acoustic Felt Wall Panels: control sample | Modular colour and sound absorption can combine when the installed assembly matches the tested build. | Test report and shop drawing show the same build. |
| 03Acoustic Felt Wall Panels: first-off fabrication | Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access. | Mock-up includes high-contact edge and demonstrated clean/replace process. |
| 04Acoustic Felt Wall Panels: exposure and care trial | Control façade moisture, dust and high-contact edge damage; verify light and fire performance. Vacuum with soft attachment, spot test and replace modules rather than over-wetting. | Freeze assembly and inspect concealed backing/coverage before closure. |
| 05Acoustic Felt Wall Panels: delivery release | Reject wrong density/thickness, reduced coverage, omitted cavity, fuzzy edges, colour drift or unsupported NRC/αw. | Acoustic Felt Wall Panels is released only when no stated rejection condition is present and the signed reference remains traceable. |
Required approval evidence
- +Acoustic Felt Wall Panels: Identity/source evidence: Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared.
- +Acoustic Felt Wall Panels: Signed selection evidence: Test report and shop drawing show the same build.
- +Acoustic Felt Wall Panels: Second technical gate: Mock-up includes high-contact edge and demonstrated clean/replace process.
- +Acoustic Felt Wall Panels: Factory close-out: Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access.
- +Acoustic Felt Wall Panels: Exposure and care record: Control façade moisture, dust and high-contact edge damage; verify light and fire performance. Vacuum with soft attachment, spot test and replace modules rather than over-wetting.
- +Acoustic Felt Wall Panels: Delivery rejection record: Reject wrong density/thickness, reduced coverage, omitted cavity, fuzzy edges, colour drift or unsupported NRC/αw.
Questions to close before approval
- 01Acoustic Felt Wall Panels: Has the exact identity been declared and evidenced: Polyester acoustic felt panel system; fibre/recycled content, density, thickness, colour, backing, air gap and mounting declared?
- 02Acoustic Felt Wall Panels: Which project requirement makes this differentiator necessary: Modular colour and sound absorption can combine when the installed assembly matches the tested build?
- 03Acoustic Felt Wall Panels: Has the team excluded the non-equivalent route: Same-colour felt at different density/thickness or mounting is not acoustically equivalent?
- 04Acoustic Felt Wall Panels: How will the factory prove this execution control: Calculate coverage, preserve air gap/backing and detail clean replaceable edges and service access?
- 05Acoustic Felt Wall Panels: Can the project control this GCC exposure: Control façade moisture, dust and high-contact edge damage; verify light and fire performance?
- 06Acoustic Felt Wall Panels: Who owns this operating rule after handover: Vacuum with soft attachment, spot test and replace modules rather than over-wetting?
Exact material application
Acoustic Felt Wall Panels on a dedicated furniture product.
This material-specific application image shows Acoustic Felt Wall Panels on its own product and is not reused by any other material page. Final colour, pattern and finish remain subject to the approved physical sample.
Project notes
From sample to production.
01
What to specify
Select after confirming substrate, fire requirement, cleaning, acoustics, humidity and joint layout. A full installed mock-up is the most reliable approval reference.
02
Fabrication & detailing
Survey substrates and coordinate setting-out with doors, outlets, lighting and joinery. Complete a mock-up before bulk installation and protect finished work from following trades.
03
Colour & finish approval
Wall finishes are approved as installed mock-ups because lighting, substrate, panel joints and hand application materially change the final appearance.
04
Care & maintenance
Follow the approved maintenance guide for the selected system. Dust or spot-clean gently; repair test areas first so colour, sheen and texture remain consistent.
Specification note
This page is a preliminary specification guide. No value, brand reference or material name constitutes automatic compliance. Current product data, test reports, physical sample or slab and the furniture construction must be approved for each project before ordering or manufacture.
Related materials
