Fabrics & Upholstery · Furniture specification
Solution-Dyed Outdoor Fabric Furniture Specifications
A weather-ready upholstery specification for pool, terrace and beach furniture where colour retention, cleanability and quick drying are critical.
Current material reference
100% solution-dyed acrylic reference; UV, water and mould resistant
Material guidance · supplier data required for approval
Material decision summary
Project suitability at a glance.
Select the exact textile by end use, cleaning regime and verified test data; fibre content or abrasion alone is not enough.
Best for
- +Pool decks, terraces, beach clubs and exposed resort seating
Avoid when
- −The complete cushion build-up cannot drain and dry quickly
- Traffic level
- High
- Maintenance
- Low
- Visual variation
- Low
- Relative budget
- ●●●○
- Suitable environments
- Covered outdoor · Exposed outdoor · Coastal · High traffic
Material overview
Most requested furniture applications
Specify abrasion, cleaning method, flame performance, lightfastness, colourfastness, pilling, width and repeat according to the exact furniture location. “Contract grade” alone is not a complete specification.
Material-specific authority schedule
Ten controls owned by this exact material—not inherited category rows. Final values are confirmed from supplier data, the project sample and shop drawings.
- Declared project reference
- Solution-Dyed Outdoor Fabric: 100% solution-dyed acrylic reference; UV, water and mould resistant
- Exact material identity
- Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data.
- Technical system definition
- A solution-dyed acrylic exterior textile whose pigment is introduced during fibre formation; successful outdoor furniture still depends on UV data, water management and the complete fast-drying cushion build.
- Selection differentiator
- Pigment introduced through the fibre supports exterior colour retention, but the cushion system still determines drying and hygiene.
- Critical approval decision
- Specify the whole drainage system—fabric, thread, mesh, reticulated foam, vents and base—because an “outdoor fabric” cannot rescue a water-trapping cushion.
- Non-equivalent substitute
- An “outdoor finish” applied to an indoor-dyed textile is not equivalent to purpose-designed solution-dyed construction.
- Fabrication focus
- Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers.
- GCC exposure limit
- Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity.
- Material-specific care rule
- Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage.
- Reject the delivery when
- Reject trapped water, corroding zip/thread, mildew odour, coating bleed, fading or delamination.
Approval pack
Documents required before ordering.
Material guidance · supplier data required for approval
- Solution-Dyed Outdoor Fabric: Identity/source evidence: Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data.
- Solution-Dyed Outdoor Fabric: Signed selection evidence: Submit current exact-colour test and warranty limitations for Gulf sun.
- Solution-Dyed Outdoor Fabric: Second technical gate: Flooded prototype drains freely and dries without retained pockets or dye/metal staining.
- Solution-Dyed Outdoor Fabric: Factory close-out: Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers.
Lead time & availability
Confirmed after source, finish and quantity selection
Family inspection atlas
A shared visual reference for construction and fabrication.
This atlas is shared by the material family; it is not a microscopy record of this exact selection. The approved sample and current supplier documents govern final colour and construction.
Material identity
What is unique—and what is shared with the family.
The exact material fingerprint comes first. Shared family science is explicitly separated in a collapsible appendix instead of being presented as unique content.
51 material-specific points · 39 shared family references
01 · Material fingerprint
What makes this exact selection technically distinct?
Position in the material family
Solution-dyed outdoor textile
- Reference that must be declared
- Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data.
- Selection differentiator
- Pigment introduced through the fibre supports exterior colour retention, but the cushion system still determines drying and hygiene.
- Not an equivalent substitute
- An “outdoor finish” applied to an indoor-dyed textile is not equivalent to purpose-designed solution-dyed construction.
- Reject the delivery when
- Reject trapped water, corroding zip/thread, mildew odour, coating bleed, fading or delamination.
Shared family reference
Open the shared Fabrics & Upholstery engineering appendix
This appendix applies to the complete Fabrics & Upholstery family. It is retained as supporting reference and is not counted as unique content for this material.
Shared family reference
Open the shared Fabrics & Upholstery engineering appendix
This appendix applies to the complete Fabrics & Upholstery family. It is retained as supporting reference and is not counted as unique content for this material.
02 · System anatomy
The material is not a single surface.
A solution-dyed acrylic exterior textile whose pigment is introduced during fibre formation; successful outdoor furniture still depends on UV data, water management and the complete fast-drying cushion build.
01Wear face
Layer function
The visible fibre, pile or polymer film that receives abrasion, light, spills and cleaning.
How to verify
Declare fibre/polymer identity, colour, surface finish and exact tested article.
02Ground construction
Layer function
Woven, knitted or coated construction controls stretch, seam behaviour, drape and appearance retention.
How to verify
Record weave/knit/coating route, usable width, repeat and directional use.
03Backing / treatment
Layer function
Backing, FR treatment, stain finish or interliner can materially change hand, adhesion and fire behaviour.
How to verify
Approve the same backing and treatment represented in current test evidence.
04Upholstery composite
Layer function
Foam, interliner, adhesive, thread, seam and frame complete the performance system.
How to verify
Test and prototype the proposed cover/filling composite, not the loose textile alone.
03 · Decision gates
Reference benchmarks and the project rule.
Abrasion
01- Reference band
- General contract and high-traffic bands must use one stated method; ACT cites 40,000 Martindale cycles or 30,000 Wyzenbeek double rubs for high-traffic woven upholstery.
- Project rule
- Treat the result as comparative laboratory evidence, never a service-life promise.
- Evidence status
- Current report for exact article, colour and backing
Pilling
02- Reference band
- ACT woven-upholstery reference: Class 3 minimum under ASTM D3511 or ASTM D4970.
- Project rule
- Increase the project requirement where a smooth appearance is critical.
- Evidence status
- Test report plus handled prototype
Seam slippage
03- Reference band
- ACT woven-upholstery reference: 25 lbf minimum in warp and weft under ASTM D4034.
- Project rule
- Prototype curved corners, tight tailoring and high-load seams.
- Evidence status
- Laboratory result and seam sample
Light fastness
04- Reference band
- ACT indoor woven reference: Grade 4 minimum at 40 hours under its cited AATCC routes; exterior exposure needs a separate outdoor route.
- Project rule
- Define window, atrium or exterior exposure rather than saying “colourfast”.
- Evidence status
- Exact-colour report and exposure location
Cleaning compatibility
05- Reference band
- No universal number: record chemical name, dilution, contact time, rinse and frequency.
- Project rule
- Test the operator’s actual detergent/disinfectant on production material.
- Evidence status
- Written supplier compatibility and cleanability trial
Fire route
06- Reference band
- Project and occupancy specific; results belong to the tested upholstery composite.
- Project rule
- State cover, treatment, interliner and filling represented by the certificate.
- Evidence status
- Current composite test evidence
04 · Family comparison
Four visually related systems that are not technically equivalent.
Coated contract surface
- Best use
- F&B, healthcare-style cleaning and high-turnover seating where wipeability is central.
- Trade-off / constraint
- Hydrolysis, coating adhesion, heat and chemical compatibility must be verified.
Woven performance textile
- Best use
- General contract upholstery requiring comfort, texture and repairable tailoring.
- Trade-off / constraint
- Snagging, pilling, seam slippage and lot variation remain construction dependent.
Velvet / pile textile
- Best use
- Luxury guestrooms and controlled public areas where depth and light response matter.
- Trade-off / constraint
- Pile marking, pressure shading and cleaning skill are visible operational issues.
Solution-dyed outdoor textile
- Best use
- Pool, terrace and coastal cushions with a draining, quick-drying complete build-up.
- Trade-off / constraint
- Face-fabric performance cannot compensate for wet foam, trapped water or corroding hardware.
05 · Factory handbook
Hold points from receiving through production release.
Fabrication focus for this exact material
Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers.
-
01Roll receiving
Control instruction
Record article, colour, dye lot, roll length, usable width, defects and face direction before acceptance.
Close-out evidence
Roll map, labels and photographed defect log
-
02Yield engineering
Control instruction
Nest furniture patterns using the approved nap, railroad direction, repeat and matching rule.
Close-out evidence
Cutting plan with net, repeat, waste and attic-stock quantities
-
03Seam prototype
Control instruction
Set needle, thread, stitch, seam allowance, backing and tension on the actual composite.
Close-out evidence
Signed high-stress seam and corner sample
-
04First-off upholstery
Control instruction
Review pattern placement, pile direction, seam grin, puckering, comfort interface and cleanability.
Close-out evidence
Approved first-off under project lighting
-
05Bulk release
Control instruction
Segregate lots, retain controls and prohibit silent backing/treatment substitutions.
Close-out evidence
Production traveller tied to control sample and lot
06 · Climate & operations
GCC exposure matrix and maintenance plan.
Material-specific climate warning
Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity.
01Air-conditioned guestroom
Preferred- Material response
- Generally stable, but window light and luggage abrasion remain local risks.
- Design control
- Select by item duty; protect window-adjacent colours and high-contact edges.
02High-turnover lobby
Conditional- Material response
- Appearance change, pilling, seam load and cleaning frequency dominate.
- Design control
- Use contract evidence plus full-size first-off and replaceable detailing.
03Food & beverage
Conditional- Material response
- Oils, coloured liquids and repeated chemical cleaning challenge the whole composite.
- Design control
- Approve stain/chemical trials and inaccessible-seam hygiene details.
04Direct sun / atrium
Conditional- Material response
- Colour and polymer ageing accelerate; dark shades may heat strongly.
- Design control
- Require exact-colour light evidence and shade strategy.
05Pool / wet clothing
Avoid- Material response
- Moisture, chlorine, sunscreen and slow drying create staining and microbial risk.
- Design control
- Use an approved outdoor composite with drainage, ventilation and cleanable seams.
06Coastal exterior
Avoid- Material response
- UV, salt, humidity, windborne soil and wet foam act simultaneously.
- Design control
- Only purpose-designed exterior fabric, thread, foam, drainage and hardware qualify.
Operational maintenance plan
Material-specific care rule
Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage.
-
01Each service / daily
Action
Vacuum or brush loose soil in the approved direction; blot fresh spills immediately.
Prohibited
Do not rub a wet stain or flood seams.
-
02After a spill
Action
Identify soil, use the approved dilution and work from edge to centre; rinse only if instructed.
Prohibited
No unlisted solvent, bleach or heat.
-
03Monthly
Action
Inspect high-contact fronts, piping, corners, seams, pile direction and concealed moisture.
Prohibited
Do not wait for foam or backing damage to become visible.
-
04Periodic deep clean
Action
Use the supplier-approved professional method and dry the composite completely before service.
Prohibited
No generic extraction method without backing/foam approval.
-
05Repair / replacement
Action
Use retained same-lot stock where possible; record replacement lot and panel position.
Prohibited
Do not mix a visibly different lot across one furniture face.
07 · Reference library
The language that governs the decision—and where it comes from.
Material glossary
- 01Martindale
- A laboratory abrasion method; the cycle result is method-specific and does not predict years of service.
- 02Wyzenbeek
- A reciprocating abrasion method reported in double rubs; it is not numerically interchangeable with Martindale.
- 03Railroaded
- The pattern or construction can be used across the roll width, affecting seams and yield.
- 04Crocking
- Transfer of colour from the textile by dry or wet rubbing.
- 05Dye lot
- A production batch expected to have closer colour continuity than separately dyed batches.
Professional and standards sources
- 01
ACT
Woven upholstery performance guidelines
Voluntary reference bands for abrasion, pilling, strength, seams and colourfastness.
Open primary source ↗ - 02
ISO
ISO 12947-2 Martindale abrasion
Specimen breakdown determination for textile fabrics.
Open primary source ↗ - 03
- 04
BSI
BS 7176 non-domestic seating
Ignition-resistance classification through tested upholstery composites.
Open primary source ↗
Material-specific technical dossier
Solution-Dyed Outdoor Fabric controls from decision to production.
Every row below is tied to this material’s identity, differentiator, fabrication, exposure or care route; no generic family rows are included in this dossier.
8 unique controls · 5 contextual test applications · 5 material-specific risks
System definition
A solution-dyed acrylic exterior textile whose pigment is introduced during fibre formation; successful outdoor furniture still depends on UV data, water management and the complete fast-drying cushion build.
Critical decision
Specify the whole drainage system—fabric, thread, mesh, reticulated foam, vents and base—because an “outdoor fabric” cannot rescue a water-trapping cushion.
01 · Selection variables
What the material schedule must lock.
01Solution-Dyed Outdoor Fabric: Exterior colour durability
- What must be declared
- Xenon/light exposure, UV warranty conditions and exact shade performance
- Approval basis
- Submit current exact-colour test and warranty limitations for Gulf sun.
02Solution-Dyed Outdoor Fabric: Drain-and-dry build
- What must be declared
- Water repellency, breathable backing, reticulated foam, mesh underside, vents and seam drainage
- Approval basis
- Flooded prototype drains freely and dries without retained pockets or dye/metal staining.
03Solution-Dyed Outdoor Fabric: identity declaration
- What must be declared
- Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data.
- Approval basis
- Specify the whole drainage system—fabric, thread, mesh, reticulated foam, vents and base—because an “outdoor fabric” cannot rescue a water-trapping cushion.
04Solution-Dyed Outdoor Fabric: equivalency boundary
- What must be declared
- Pigment introduced through the fibre supports exterior colour retention, but the cushion system still determines drying and hygiene.
- Approval basis
- An “outdoor finish” applied to an indoor-dyed textile is not equivalent to purpose-designed solution-dyed construction.
05Solution-Dyed Outdoor Fabric: factory execution
- What must be declared
- Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers.
- Approval basis
- Submit current exact-colour test and warranty limitations for Gulf sun.
06Solution-Dyed Outdoor Fabric: GCC exposure control
- What must be declared
- Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity.
- Approval basis
- Release only when the project detail and maintenance route close this exact exposure risk for Solution-Dyed Outdoor Fabric.
07Solution-Dyed Outdoor Fabric: operational care route
- What must be declared
- Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage.
- Approval basis
- Issue a named cleaning and repair method for Solution-Dyed Outdoor Fabric; generic family care is not approval.
08Solution-Dyed Outdoor Fabric: delivery rejection boundary
- What must be declared
- Reject trapped water, corroding zip/thread, mildew odour, coating bleed, fading or delamination.
- Approval basis
- The signed sample, first-off item and delivery inspection must all close this rejection condition for Solution-Dyed Outdoor Fabric.
| Variable | What must be declared | Approval basis |
|---|---|---|
| 01Solution-Dyed Outdoor Fabric: Exterior colour durability | Xenon/light exposure, UV warranty conditions and exact shade performance | Submit current exact-colour test and warranty limitations for Gulf sun. |
| 02Solution-Dyed Outdoor Fabric: Drain-and-dry build | Water repellency, breathable backing, reticulated foam, mesh underside, vents and seam drainage | Flooded prototype drains freely and dries without retained pockets or dye/metal staining. |
| 03Solution-Dyed Outdoor Fabric: identity declaration | Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data. | Specify the whole drainage system—fabric, thread, mesh, reticulated foam, vents and base—because an “outdoor fabric” cannot rescue a water-trapping cushion. |
| 04Solution-Dyed Outdoor Fabric: equivalency boundary | Pigment introduced through the fibre supports exterior colour retention, but the cushion system still determines drying and hygiene. | An “outdoor finish” applied to an indoor-dyed textile is not equivalent to purpose-designed solution-dyed construction. |
| 05Solution-Dyed Outdoor Fabric: factory execution | Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers. | Submit current exact-colour test and warranty limitations for Gulf sun. |
| 06Solution-Dyed Outdoor Fabric: GCC exposure control | Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity. | Release only when the project detail and maintenance route close this exact exposure risk for Solution-Dyed Outdoor Fabric. |
| 07Solution-Dyed Outdoor Fabric: operational care route | Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage. | Issue a named cleaning and repair method for Solution-Dyed Outdoor Fabric; generic family care is not approval. |
| 08Solution-Dyed Outdoor Fabric: delivery rejection boundary | Reject trapped water, corroding zip/thread, mildew odour, coating bleed, fading or delamination. | The signed sample, first-off item and delivery inspection must all close this rejection condition for Solution-Dyed Outdoor Fabric. |
02 · Verification
Test and evidence matrix.
Test methods are not compliance certificates or automatic pass values. The project must state the method, required result, tested construction and current report it will accept.
ISO 12947-2 / ISO 12947-4
01- What it measures
- Martindale specimen breakdown and appearance change for uncoated textiles.
- How to use it here
- Specify the applicable part and project acceptance level; a cycle count is not a universal service-life guarantee. Material-specific acceptance for Solution-Dyed Outdoor Fabric: Submit current exact-colour test and warranty limitations for Gulf sun.
ISO 5470-2
02- What it measures
- Wet and dry abrasion of rubber- or plastics-coated fabric surfaces.
- How to use it here
- Use for coated faux leather/PU faces where ISO 12947 for uncoated textiles is not the correct surface method. Material-specific acceptance for Solution-Dyed Outdoor Fabric: Flooded prototype drains freely and dries without retained pockets or dye/metal staining.
ISO 105-X12
03- What it measures
- Colour transfer and staining under dry and wet rubbing.
- How to use it here
- Test the exact colour; dark and saturated shades can behave differently from collection averages. Material-specific acceptance for Solution-Dyed Outdoor Fabric: Approve a drainage section and wet test the complete cushion/furniture assembly.
ISO 105-B02
04- What it measures
- Colour fastness to artificial light representative of daylight.
- How to use it here
- Prioritise for window-adjacent, atrium and exterior applications; state the required rating. Material-specific acceptance for Solution-Dyed Outdoor Fabric: Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers.
BS EN 1021-1 / BS 7176
05- What it measures
- Ignitability of upholstery composites and non-domestic seating hazard classification.
- How to use it here
- The project fire strategy determines the route. Submit evidence for the actual cover/filling composite. Material-specific acceptance for Solution-Dyed Outdoor Fabric: Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity.
03 · Performance
Failure-mode and control register.
01Solution-Dyed Outdoor Fabric: Mould, odour and internal corrosion despite outdoor fabric
- Likely cause
- Foam, liner, base or frame traps water and organic soil.
- Preventive control
- Approve a drainage section and wet test the complete cushion/furniture assembly.
02Solution-Dyed Outdoor Fabric: non-equivalent substitution accepted
- Likely cause
- An “outdoor finish” applied to an indoor-dyed textile is not equivalent to purpose-designed solution-dyed construction.
- Preventive control
- Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data.
03Solution-Dyed Outdoor Fabric: material signature lost in fabrication
- Likely cause
- The workshop route does not implement the material-specific fabrication focus: Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers.
- Preventive control
- Flooded prototype drains freely and dries without retained pockets or dye/metal staining.
04Solution-Dyed Outdoor Fabric: GCC exposure mismatch
- Likely cause
- Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity.
- Preventive control
- Re-detail, relocate or reject Solution-Dyed Outdoor Fabric where the stated exposure cannot be controlled.
05Solution-Dyed Outdoor Fabric: cleaning or maintenance damage
- Likely cause
- Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage.
- Preventive control
- Train operations on the named care route and retain a signed repair reference for Solution-Dyed Outdoor Fabric.
| Failure mode | Likely cause | Preventive control |
|---|---|---|
| 01Solution-Dyed Outdoor Fabric: Mould, odour and internal corrosion despite outdoor fabric | Foam, liner, base or frame traps water and organic soil. | Approve a drainage section and wet test the complete cushion/furniture assembly. |
| 02Solution-Dyed Outdoor Fabric: non-equivalent substitution accepted | An “outdoor finish” applied to an indoor-dyed textile is not equivalent to purpose-designed solution-dyed construction. | Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data. |
| 03Solution-Dyed Outdoor Fabric: material signature lost in fabrication | The workshop route does not implement the material-specific fabrication focus: Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers. | Flooded prototype drains freely and dries without retained pockets or dye/metal staining. |
| 04Solution-Dyed Outdoor Fabric: GCC exposure mismatch | Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity. | Re-detail, relocate or reject Solution-Dyed Outdoor Fabric where the stated exposure cannot be controlled. |
| 05Solution-Dyed Outdoor Fabric: cleaning or maintenance damage | Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage. | Train operations on the named care route and retain a signed repair reference for Solution-Dyed Outdoor Fabric. |
04 · Tender-ready
Copy-ready specification clause.
Provide 100% solution-dyed acrylic exterior upholstery or approved equivalent for the scheduled exposed/covered location. Submit exact-colour artificial-light/UV data, wet/dry rub, abrasion appearance, pilling, water repellency, mould resistance, chlorine/salt/cleaner compatibility and applicable fire evidence. The furniture submittal shall show UV-stable thread, breathable liner, reticulated foam, drainage mesh/vents and corrosion-compatible frame. Approval requires a production-colour exposure sample and a full cushion drainage test.
05 · Quality control
Inspection plan from submittal to handover.
01Solution-Dyed Outdoor Fabric: identity and source
- Inspection
- Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data.
- Acceptance / hold point
- Documents, labels and physical material all identify the same Solution-Dyed Outdoor Fabric construction and source.
02Solution-Dyed Outdoor Fabric: control sample
- Inspection
- Pigment introduced through the fibre supports exterior colour retention, but the cushion system still determines drying and hygiene.
- Acceptance / hold point
- Submit current exact-colour test and warranty limitations for Gulf sun.
03Solution-Dyed Outdoor Fabric: first-off fabrication
- Inspection
- Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers.
- Acceptance / hold point
- Flooded prototype drains freely and dries without retained pockets or dye/metal staining.
04Solution-Dyed Outdoor Fabric: exposure and care trial
- Inspection
- Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity. Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage.
- Acceptance / hold point
- Approve a drainage section and wet test the complete cushion/furniture assembly.
05Solution-Dyed Outdoor Fabric: delivery release
- Inspection
- Reject trapped water, corroding zip/thread, mildew odour, coating bleed, fading or delamination.
- Acceptance / hold point
- Solution-Dyed Outdoor Fabric is released only when no stated rejection condition is present and the signed reference remains traceable.
| Stage | Inspection | Acceptance / hold point |
|---|---|---|
| 01Solution-Dyed Outdoor Fabric: identity and source | Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data. | Documents, labels and physical material all identify the same Solution-Dyed Outdoor Fabric construction and source. |
| 02Solution-Dyed Outdoor Fabric: control sample | Pigment introduced through the fibre supports exterior colour retention, but the cushion system still determines drying and hygiene. | Submit current exact-colour test and warranty limitations for Gulf sun. |
| 03Solution-Dyed Outdoor Fabric: first-off fabrication | Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers. | Flooded prototype drains freely and dries without retained pockets or dye/metal staining. |
| 04Solution-Dyed Outdoor Fabric: exposure and care trial | Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity. Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage. | Approve a drainage section and wet test the complete cushion/furniture assembly. |
| 05Solution-Dyed Outdoor Fabric: delivery release | Reject trapped water, corroding zip/thread, mildew odour, coating bleed, fading or delamination. | Solution-Dyed Outdoor Fabric is released only when no stated rejection condition is present and the signed reference remains traceable. |
Required approval evidence
- +Solution-Dyed Outdoor Fabric: Identity/source evidence: Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data.
- +Solution-Dyed Outdoor Fabric: Signed selection evidence: Submit current exact-colour test and warranty limitations for Gulf sun.
- +Solution-Dyed Outdoor Fabric: Second technical gate: Flooded prototype drains freely and dries without retained pockets or dye/metal staining.
- +Solution-Dyed Outdoor Fabric: Factory close-out: Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers.
- +Solution-Dyed Outdoor Fabric: Exposure and care record: Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity. Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage.
- +Solution-Dyed Outdoor Fabric: Delivery rejection record: Reject trapped water, corroding zip/thread, mildew odour, coating bleed, fading or delamination.
Questions to close before approval
- 01Solution-Dyed Outdoor Fabric: Has the exact identity been declared and evidenced: Solution-dyed exterior textile; exact polymer, UV/light rating, salt/chlorine fastness, water repellency and FR route require current supplier data?
- 02Solution-Dyed Outdoor Fabric: Which project requirement makes this differentiator necessary: Pigment introduced through the fibre supports exterior colour retention, but the cushion system still determines drying and hygiene?
- 03Solution-Dyed Outdoor Fabric: Has the team excluded the non-equivalent route: An “outdoor finish” applied to an indoor-dyed textile is not equivalent to purpose-designed solution-dyed construction?
- 04Solution-Dyed Outdoor Fabric: How will the factory prove this execution control: Use exterior thread, vented seams, quick-drain foam, mesh base and removable serviceable covers?
- 05Solution-Dyed Outdoor Fabric: Can the project control this GCC exposure: Test the complete build for Gulf UV, salt, sunscreen, chlorine, heat and overnight humidity?
- 06Solution-Dyed Outdoor Fabric: Who owns this operating rule after handover: Rinse salt/chlorine, remove cushions from standing water and dry both face and foam before storage?
Exact material application
Solution-Dyed Outdoor Fabric on a dedicated furniture product.
This material-specific application image shows Solution-Dyed Outdoor Fabric on its own product and is not reused by any other material page. Final colour, pattern and finish remain subject to the approved physical sample.
Project notes
From sample to production.
01
What to specify
Specify abrasion, cleaning method, flame performance, lightfastness, colourfastness, pilling, width and repeat according to the exact furniture location. “Contract grade” alone is not a complete specification.
02
Fabrication & detailing
Confirm repeat, direction, seam placement, FR interliner and foam compatibility before cutting. High-contact furniture should use replaceable covers or serviceable upholstery details where practical.
03
Colour & finish approval
Colour, texture, pile direction and dye-lot variation are approved from a current cutting. Pattern alignment and railroad suitability are checked against the furniture drawing.
04
Care & maintenance
Vacuum gently and blot spills immediately. Use only the cleaning method approved for the selected fibre and finish; test any agent on a concealed sample first.
Specification note
This page is a preliminary specification guide. No value, brand reference or material name constitutes automatic compliance. Current product data, test reports, physical sample or slab and the furniture construction must be approved for each project before ordering or manufacture.
Related materials
