Fabrics & Upholstery · Furniture specification
Graphite Chenille Upholstery Furniture Specifications
A dense, soft contract chenille for guestrooms and public-area seating where a residential hand feel must support commercial use.
Current material reference
100% polyester; 60,000 Martindale project reference; FR treated
Material guidance · supplier data required for approval
Material decision summary
Project suitability at a glance.
Select the exact textile by end use, cleaning regime and verified test data; fibre content or abrasion alone is not enough.
Best for
- +Contract seating, banquettes and upholstered panels
- +Projects that can approve the exact colour, backing and test data
Avoid when
- −The cleaning method, fire requirement or end use has not been defined
- Traffic level
- High
- Maintenance
- Medium
- Visual variation
- Medium
- Relative budget
- ●●○○
- Suitable environments
- Interior · High traffic · Food service
Material overview
Most requested furniture applications
Specify abrasion, cleaning method, flame performance, lightfastness, colourfastness, pilling, width and repeat according to the exact furniture location. “Contract grade” alone is not a complete specification.
Material-specific authority schedule
Ten controls owned by this exact material—not inherited category rows. Final values are confirmed from supplier data, the project sample and shop drawings.
- Declared project reference
- Graphite Chenille Upholstery: 100% polyester; 60,000 Martindale project reference; FR treated
- Exact material identity
- Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier.
- Technical system definition
- A dense polyester chenille using cut-pile yarns for a soft, low-lustre graphite surface with strong contract practicality but possible directional marking and pile polishing.
- Selection differentiator
- Soft dense handle and dark forgiving colour for frequent-use seating when pile polishing is accepted.
- Critical approval decision
- Confirm that the stated project reference of 60,000 Martindale and FR treatment applies to the exact supplied colour/backing, then assess pile appearance after wear.
- Non-equivalent substitute
- Velvet or flat weave of the same colour will not match chenille abrasion appearance, seam bulk or cleaning response.
- Fabrication focus
- Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing.
- GCC exposure limit
- Dark graphite near strong sun can reveal fading and pile-direction contrast.
- Material-specific care rule
- Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently.
- Reject the delivery when
- Reject bald/polished zones, tracking, seam grin, colour transfer or crushed delivery marks.
Approval pack
Documents required before ordering.
Material guidance · supplier data required for approval
- Graphite Chenille Upholstery: Identity/source evidence: Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier.
- Graphite Chenille Upholstery: Signed selection evidence: Appearance-change sample and first-off are reviewed after handling, not only new.
- Graphite Chenille Upholstery: Second technical gate: Exact graphite colour meets the agreed fastness rating.
- Graphite Chenille Upholstery: Factory close-out: Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing.
Lead time & availability
Confirmed after source, finish and quantity selection
Family inspection atlas
A shared visual reference for construction and fabrication.
This atlas is shared by the material family; it is not a microscopy record of this exact selection. The approved sample and current supplier documents govern final colour and construction.
Material identity
What is unique—and what is shared with the family.
The exact material fingerprint comes first. Shared family science is explicitly separated in a collapsible appendix instead of being presented as unique content.
51 material-specific points · 39 shared family references
01 · Material fingerprint
What makes this exact selection technically distinct?
Position in the material family
Woven performance textile
- Reference that must be declared
- Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier.
- Selection differentiator
- Soft dense handle and dark forgiving colour for frequent-use seating when pile polishing is accepted.
- Not an equivalent substitute
- Velvet or flat weave of the same colour will not match chenille abrasion appearance, seam bulk or cleaning response.
- Reject the delivery when
- Reject bald/polished zones, tracking, seam grin, colour transfer or crushed delivery marks.
Shared family reference
Open the shared Fabrics & Upholstery engineering appendix
This appendix applies to the complete Fabrics & Upholstery family. It is retained as supporting reference and is not counted as unique content for this material.
Shared family reference
Open the shared Fabrics & Upholstery engineering appendix
This appendix applies to the complete Fabrics & Upholstery family. It is retained as supporting reference and is not counted as unique content for this material.
02 · System anatomy
The material is not a single surface.
A dense polyester chenille using cut-pile yarns for a soft, low-lustre graphite surface with strong contract practicality but possible directional marking and pile polishing.
01Wear face
Layer function
The visible fibre, pile or polymer film that receives abrasion, light, spills and cleaning.
How to verify
Declare fibre/polymer identity, colour, surface finish and exact tested article.
02Ground construction
Layer function
Woven, knitted or coated construction controls stretch, seam behaviour, drape and appearance retention.
How to verify
Record weave/knit/coating route, usable width, repeat and directional use.
03Backing / treatment
Layer function
Backing, FR treatment, stain finish or interliner can materially change hand, adhesion and fire behaviour.
How to verify
Approve the same backing and treatment represented in current test evidence.
04Upholstery composite
Layer function
Foam, interliner, adhesive, thread, seam and frame complete the performance system.
How to verify
Test and prototype the proposed cover/filling composite, not the loose textile alone.
03 · Decision gates
Reference benchmarks and the project rule.
Abrasion
01- Reference band
- General contract and high-traffic bands must use one stated method; ACT cites 40,000 Martindale cycles or 30,000 Wyzenbeek double rubs for high-traffic woven upholstery.
- Project rule
- Treat the result as comparative laboratory evidence, never a service-life promise.
- Evidence status
- Current report for exact article, colour and backing
Pilling
02- Reference band
- ACT woven-upholstery reference: Class 3 minimum under ASTM D3511 or ASTM D4970.
- Project rule
- Increase the project requirement where a smooth appearance is critical.
- Evidence status
- Test report plus handled prototype
Seam slippage
03- Reference band
- ACT woven-upholstery reference: 25 lbf minimum in warp and weft under ASTM D4034.
- Project rule
- Prototype curved corners, tight tailoring and high-load seams.
- Evidence status
- Laboratory result and seam sample
Light fastness
04- Reference band
- ACT indoor woven reference: Grade 4 minimum at 40 hours under its cited AATCC routes; exterior exposure needs a separate outdoor route.
- Project rule
- Define window, atrium or exterior exposure rather than saying “colourfast”.
- Evidence status
- Exact-colour report and exposure location
Cleaning compatibility
05- Reference band
- No universal number: record chemical name, dilution, contact time, rinse and frequency.
- Project rule
- Test the operator’s actual detergent/disinfectant on production material.
- Evidence status
- Written supplier compatibility and cleanability trial
Fire route
06- Reference band
- Project and occupancy specific; results belong to the tested upholstery composite.
- Project rule
- State cover, treatment, interliner and filling represented by the certificate.
- Evidence status
- Current composite test evidence
04 · Family comparison
Four visually related systems that are not technically equivalent.
Coated contract surface
- Best use
- F&B, healthcare-style cleaning and high-turnover seating where wipeability is central.
- Trade-off / constraint
- Hydrolysis, coating adhesion, heat and chemical compatibility must be verified.
Woven performance textile
- Best use
- General contract upholstery requiring comfort, texture and repairable tailoring.
- Trade-off / constraint
- Snagging, pilling, seam slippage and lot variation remain construction dependent.
Velvet / pile textile
- Best use
- Luxury guestrooms and controlled public areas where depth and light response matter.
- Trade-off / constraint
- Pile marking, pressure shading and cleaning skill are visible operational issues.
Solution-dyed outdoor textile
- Best use
- Pool, terrace and coastal cushions with a draining, quick-drying complete build-up.
- Trade-off / constraint
- Face-fabric performance cannot compensate for wet foam, trapped water or corroding hardware.
05 · Factory handbook
Hold points from receiving through production release.
Fabrication focus for this exact material
Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing.
-
01Roll receiving
Control instruction
Record article, colour, dye lot, roll length, usable width, defects and face direction before acceptance.
Close-out evidence
Roll map, labels and photographed defect log
-
02Yield engineering
Control instruction
Nest furniture patterns using the approved nap, railroad direction, repeat and matching rule.
Close-out evidence
Cutting plan with net, repeat, waste and attic-stock quantities
-
03Seam prototype
Control instruction
Set needle, thread, stitch, seam allowance, backing and tension on the actual composite.
Close-out evidence
Signed high-stress seam and corner sample
-
04First-off upholstery
Control instruction
Review pattern placement, pile direction, seam grin, puckering, comfort interface and cleanability.
Close-out evidence
Approved first-off under project lighting
-
05Bulk release
Control instruction
Segregate lots, retain controls and prohibit silent backing/treatment substitutions.
Close-out evidence
Production traveller tied to control sample and lot
06 · Climate & operations
GCC exposure matrix and maintenance plan.
Material-specific climate warning
Dark graphite near strong sun can reveal fading and pile-direction contrast.
01Air-conditioned guestroom
Preferred- Material response
- Generally stable, but window light and luggage abrasion remain local risks.
- Design control
- Select by item duty; protect window-adjacent colours and high-contact edges.
02High-turnover lobby
Conditional- Material response
- Appearance change, pilling, seam load and cleaning frequency dominate.
- Design control
- Use contract evidence plus full-size first-off and replaceable detailing.
03Food & beverage
Conditional- Material response
- Oils, coloured liquids and repeated chemical cleaning challenge the whole composite.
- Design control
- Approve stain/chemical trials and inaccessible-seam hygiene details.
04Direct sun / atrium
Conditional- Material response
- Colour and polymer ageing accelerate; dark shades may heat strongly.
- Design control
- Require exact-colour light evidence and shade strategy.
05Pool / wet clothing
Avoid- Material response
- Moisture, chlorine, sunscreen and slow drying create staining and microbial risk.
- Design control
- Use an approved outdoor composite with drainage, ventilation and cleanable seams.
06Coastal exterior
Avoid- Material response
- UV, salt, humidity, windborne soil and wet foam act simultaneously.
- Design control
- Only purpose-designed exterior fabric, thread, foam, drainage and hardware qualify.
Operational maintenance plan
Material-specific care rule
Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently.
-
01Each service / daily
Action
Vacuum or brush loose soil in the approved direction; blot fresh spills immediately.
Prohibited
Do not rub a wet stain or flood seams.
-
02After a spill
Action
Identify soil, use the approved dilution and work from edge to centre; rinse only if instructed.
Prohibited
No unlisted solvent, bleach or heat.
-
03Monthly
Action
Inspect high-contact fronts, piping, corners, seams, pile direction and concealed moisture.
Prohibited
Do not wait for foam or backing damage to become visible.
-
04Periodic deep clean
Action
Use the supplier-approved professional method and dry the composite completely before service.
Prohibited
No generic extraction method without backing/foam approval.
-
05Repair / replacement
Action
Use retained same-lot stock where possible; record replacement lot and panel position.
Prohibited
Do not mix a visibly different lot across one furniture face.
07 · Reference library
The language that governs the decision—and where it comes from.
Material glossary
- 01Martindale
- A laboratory abrasion method; the cycle result is method-specific and does not predict years of service.
- 02Wyzenbeek
- A reciprocating abrasion method reported in double rubs; it is not numerically interchangeable with Martindale.
- 03Railroaded
- The pattern or construction can be used across the roll width, affecting seams and yield.
- 04Crocking
- Transfer of colour from the textile by dry or wet rubbing.
- 05Dye lot
- A production batch expected to have closer colour continuity than separately dyed batches.
Professional and standards sources
- 01
ACT
Woven upholstery performance guidelines
Voluntary reference bands for abrasion, pilling, strength, seams and colourfastness.
Open primary source ↗ - 02
ISO
ISO 12947-2 Martindale abrasion
Specimen breakdown determination for textile fabrics.
Open primary source ↗ - 03
- 04
BSI
BS 7176 non-domestic seating
Ignition-resistance classification through tested upholstery composites.
Open primary source ↗
Material-specific technical dossier
Graphite Chenille Upholstery controls from decision to production.
Every row below is tied to this material’s identity, differentiator, fabrication, exposure or care route; no generic family rows are included in this dossier.
8 unique controls · 5 contextual test applications · 5 material-specific risks
System definition
A dense polyester chenille using cut-pile yarns for a soft, low-lustre graphite surface with strong contract practicality but possible directional marking and pile polishing.
Critical decision
Confirm that the stated project reference of 60,000 Martindale and FR treatment applies to the exact supplied colour/backing, then assess pile appearance after wear.
01 · Selection variables
What the material schedule must lock.
01Graphite Chenille Upholstery: Chenille pile change
- What must be declared
- Matting, tracking, polishing and shade change under pressure/abrasion
- Approval basis
- Appearance-change sample and first-off are reviewed after handling, not only new.
02Graphite Chenille Upholstery: Dark-shade transfer
- What must be declared
- Dry/wet rub and staining of pale clothing or adjacent textiles
- Approval basis
- Exact graphite colour meets the agreed fastness rating.
03Graphite Chenille Upholstery: identity declaration
- What must be declared
- Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier.
- Approval basis
- Confirm that the stated project reference of 60,000 Martindale and FR treatment applies to the exact supplied colour/backing, then assess pile appearance after wear.
04Graphite Chenille Upholstery: equivalency boundary
- What must be declared
- Soft dense handle and dark forgiving colour for frequent-use seating when pile polishing is accepted.
- Approval basis
- Velvet or flat weave of the same colour will not match chenille abrasion appearance, seam bulk or cleaning response.
05Graphite Chenille Upholstery: factory execution
- What must be declared
- Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing.
- Approval basis
- Appearance-change sample and first-off are reviewed after handling, not only new.
06Graphite Chenille Upholstery: GCC exposure control
- What must be declared
- Dark graphite near strong sun can reveal fading and pile-direction contrast.
- Approval basis
- Release only when the project detail and maintenance route close this exact exposure risk for Graphite Chenille Upholstery.
07Graphite Chenille Upholstery: operational care route
- What must be declared
- Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently.
- Approval basis
- Issue a named cleaning and repair method for Graphite Chenille Upholstery; generic family care is not approval.
08Graphite Chenille Upholstery: delivery rejection boundary
- What must be declared
- Reject bald/polished zones, tracking, seam grin, colour transfer or crushed delivery marks.
- Approval basis
- The signed sample, first-off item and delivery inspection must all close this rejection condition for Graphite Chenille Upholstery.
| Variable | What must be declared | Approval basis |
|---|---|---|
| 01Graphite Chenille Upholstery: Chenille pile change | Matting, tracking, polishing and shade change under pressure/abrasion | Appearance-change sample and first-off are reviewed after handling, not only new. |
| 02Graphite Chenille Upholstery: Dark-shade transfer | Dry/wet rub and staining of pale clothing or adjacent textiles | Exact graphite colour meets the agreed fastness rating. |
| 03Graphite Chenille Upholstery: identity declaration | Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier. | Confirm that the stated project reference of 60,000 Martindale and FR treatment applies to the exact supplied colour/backing, then assess pile appearance after wear. |
| 04Graphite Chenille Upholstery: equivalency boundary | Soft dense handle and dark forgiving colour for frequent-use seating when pile polishing is accepted. | Velvet or flat weave of the same colour will not match chenille abrasion appearance, seam bulk or cleaning response. |
| 05Graphite Chenille Upholstery: factory execution | Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing. | Appearance-change sample and first-off are reviewed after handling, not only new. |
| 06Graphite Chenille Upholstery: GCC exposure control | Dark graphite near strong sun can reveal fading and pile-direction contrast. | Release only when the project detail and maintenance route close this exact exposure risk for Graphite Chenille Upholstery. |
| 07Graphite Chenille Upholstery: operational care route | Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently. | Issue a named cleaning and repair method for Graphite Chenille Upholstery; generic family care is not approval. |
| 08Graphite Chenille Upholstery: delivery rejection boundary | Reject bald/polished zones, tracking, seam grin, colour transfer or crushed delivery marks. | The signed sample, first-off item and delivery inspection must all close this rejection condition for Graphite Chenille Upholstery. |
02 · Verification
Test and evidence matrix.
Test methods are not compliance certificates or automatic pass values. The project must state the method, required result, tested construction and current report it will accept.
ISO 12947-2 / ISO 12947-4
01- What it measures
- Martindale specimen breakdown and appearance change for uncoated textiles.
- How to use it here
- Specify the applicable part and project acceptance level; a cycle count is not a universal service-life guarantee. Material-specific acceptance for Graphite Chenille Upholstery: Appearance-change sample and first-off are reviewed after handling, not only new.
ISO 5470-2
02- What it measures
- Wet and dry abrasion of rubber- or plastics-coated fabric surfaces.
- How to use it here
- Use for coated faux leather/PU faces where ISO 12947 for uncoated textiles is not the correct surface method. Material-specific acceptance for Graphite Chenille Upholstery: Exact graphite colour meets the agreed fastness rating.
ISO 105-X12
03- What it measures
- Colour transfer and staining under dry and wet rubbing.
- How to use it here
- Test the exact colour; dark and saturated shades can behave differently from collection averages. Material-specific acceptance for Graphite Chenille Upholstery: Approve appearance change at duty cycles and orient/maintain pile consistently.
ISO 105-B02
04- What it measures
- Colour fastness to artificial light representative of daylight.
- How to use it here
- Prioritise for window-adjacent, atrium and exterior applications; state the required rating. Material-specific acceptance for Graphite Chenille Upholstery: Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing.
BS EN 1021-1 / BS 7176
05- What it measures
- Ignitability of upholstery composites and non-domestic seating hazard classification.
- How to use it here
- The project fire strategy determines the route. Submit evidence for the actual cover/filling composite. Material-specific acceptance for Graphite Chenille Upholstery: Dark graphite near strong sun can reveal fading and pile-direction contrast.
03 · Performance
Failure-mode and control register.
01Graphite Chenille Upholstery: High-contact zones become shiny
- Likely cause
- Chenille pile flattens and reflects light differently even before fibre breakdown.
- Preventive control
- Approve appearance change at duty cycles and orient/maintain pile consistently.
02Graphite Chenille Upholstery: non-equivalent substitution accepted
- Likely cause
- Velvet or flat weave of the same colour will not match chenille abrasion appearance, seam bulk or cleaning response.
- Preventive control
- Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier.
03Graphite Chenille Upholstery: material signature lost in fabrication
- Likely cause
- The workshop route does not implement the material-specific fabrication focus: Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing.
- Preventive control
- Exact graphite colour meets the agreed fastness rating.
04Graphite Chenille Upholstery: GCC exposure mismatch
- Likely cause
- Dark graphite near strong sun can reveal fading and pile-direction contrast.
- Preventive control
- Re-detail, relocate or reject Graphite Chenille Upholstery where the stated exposure cannot be controlled.
05Graphite Chenille Upholstery: cleaning or maintenance damage
- Likely cause
- Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently.
- Preventive control
- Train operations on the named care route and retain a signed repair reference for Graphite Chenille Upholstery.
| Failure mode | Likely cause | Preventive control |
|---|---|---|
| 01Graphite Chenille Upholstery: High-contact zones become shiny | Chenille pile flattens and reflects light differently even before fibre breakdown. | Approve appearance change at duty cycles and orient/maintain pile consistently. |
| 02Graphite Chenille Upholstery: non-equivalent substitution accepted | Velvet or flat weave of the same colour will not match chenille abrasion appearance, seam bulk or cleaning response. | Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier. |
| 03Graphite Chenille Upholstery: material signature lost in fabrication | The workshop route does not implement the material-specific fabrication focus: Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing. | Exact graphite colour meets the agreed fastness rating. |
| 04Graphite Chenille Upholstery: GCC exposure mismatch | Dark graphite near strong sun can reveal fading and pile-direction contrast. | Re-detail, relocate or reject Graphite Chenille Upholstery where the stated exposure cannot be controlled. |
| 05Graphite Chenille Upholstery: cleaning or maintenance damage | Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently. | Train operations on the named care route and retain a signed repair reference for Graphite Chenille Upholstery. |
04 · Tender-ready
Copy-ready specification clause.
Provide graphite polyester chenille upholstery, project reference 100% polyester, 60,000 Martindale and FR treatment subject to current exact-colour certification. Submit construction, backing, width/weight, abrasion breakdown and appearance change, pilling, seam slippage, dry/wet rub, light fastness, cleaning and composite fire evidence. The first-off item shall demonstrate consistent pile direction, seam quality and acceptable tracking after handling.
05 · Quality control
Inspection plan from submittal to handover.
01Graphite Chenille Upholstery: identity and source
- Inspection
- Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier.
- Acceptance / hold point
- Documents, labels and physical material all identify the same Graphite Chenille Upholstery construction and source.
02Graphite Chenille Upholstery: control sample
- Inspection
- Soft dense handle and dark forgiving colour for frequent-use seating when pile polishing is accepted.
- Acceptance / hold point
- Appearance-change sample and first-off are reviewed after handling, not only new.
03Graphite Chenille Upholstery: first-off fabrication
- Inspection
- Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing.
- Acceptance / hold point
- Exact graphite colour meets the agreed fastness rating.
04Graphite Chenille Upholstery: exposure and care trial
- Inspection
- Dark graphite near strong sun can reveal fading and pile-direction contrast. Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently.
- Acceptance / hold point
- Approve appearance change at duty cycles and orient/maintain pile consistently.
05Graphite Chenille Upholstery: delivery release
- Inspection
- Reject bald/polished zones, tracking, seam grin, colour transfer or crushed delivery marks.
- Acceptance / hold point
- Graphite Chenille Upholstery is released only when no stated rejection condition is present and the signed reference remains traceable.
| Stage | Inspection | Acceptance / hold point |
|---|---|---|
| 01Graphite Chenille Upholstery: identity and source | Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier. | Documents, labels and physical material all identify the same Graphite Chenille Upholstery construction and source. |
| 02Graphite Chenille Upholstery: control sample | Soft dense handle and dark forgiving colour for frequent-use seating when pile polishing is accepted. | Appearance-change sample and first-off are reviewed after handling, not only new. |
| 03Graphite Chenille Upholstery: first-off fabrication | Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing. | Exact graphite colour meets the agreed fastness rating. |
| 04Graphite Chenille Upholstery: exposure and care trial | Dark graphite near strong sun can reveal fading and pile-direction contrast. Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently. | Approve appearance change at duty cycles and orient/maintain pile consistently. |
| 05Graphite Chenille Upholstery: delivery release | Reject bald/polished zones, tracking, seam grin, colour transfer or crushed delivery marks. | Graphite Chenille Upholstery is released only when no stated rejection condition is present and the signed reference remains traceable. |
Required approval evidence
- +Graphite Chenille Upholstery: Identity/source evidence: Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier.
- +Graphite Chenille Upholstery: Signed selection evidence: Appearance-change sample and first-off are reviewed after handling, not only new.
- +Graphite Chenille Upholstery: Second technical gate: Exact graphite colour meets the agreed fastness rating.
- +Graphite Chenille Upholstery: Factory close-out: Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing.
- +Graphite Chenille Upholstery: Exposure and care record: Dark graphite near strong sun can reveal fading and pile-direction contrast. Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently.
- +Graphite Chenille Upholstery: Delivery rejection record: Reject bald/polished zones, tracking, seam grin, colour transfer or crushed delivery marks.
Questions to close before approval
- 01Graphite Chenille Upholstery: Has the exact identity been declared and evidenced: Graphite chenille upholstery; yarn fibre, pile construction, weight, backing and contract tests are confirmed by selected supplier?
- 02Graphite Chenille Upholstery: Which project requirement makes this differentiator necessary: Soft dense handle and dark forgiving colour for frequent-use seating when pile polishing is accepted?
- 03Graphite Chenille Upholstery: Has the team excluded the non-equivalent route: Velvet or flat weave of the same colour will not match chenille abrasion appearance, seam bulk or cleaning response?
- 04Graphite Chenille Upholstery: How will the factory prove this execution control: Control seam bulk, nap direction and corner tension; inspect for yarn displacement and glazing?
- 05Graphite Chenille Upholstery: Can the project control this GCC exposure: Dark graphite near strong sun can reveal fading and pile-direction contrast?
- 06Graphite Chenille Upholstery: Who owns this operating rule after handover: Vacuum and rotate cushions; remove oily deposits before they polish the pile permanently?
Exact material application
Graphite Chenille Upholstery on a dedicated furniture product.
This material-specific application image shows Graphite Chenille Upholstery on its own product and is not reused by any other material page. Final colour, pattern and finish remain subject to the approved physical sample.
Project notes
From sample to production.
01
What to specify
Specify abrasion, cleaning method, flame performance, lightfastness, colourfastness, pilling, width and repeat according to the exact furniture location. “Contract grade” alone is not a complete specification.
02
Fabrication & detailing
Confirm repeat, direction, seam placement, FR interliner and foam compatibility before cutting. High-contact furniture should use replaceable covers or serviceable upholstery details where practical.
03
Colour & finish approval
Colour, texture, pile direction and dye-lot variation are approved from a current cutting. Pattern alignment and railroad suitability are checked against the furniture drawing.
04
Care & maintenance
Vacuum gently and blot spills immediately. Use only the cleaning method approved for the selected fibre and finish; test any agent on a concealed sample first.
Specification note
This page is a preliminary specification guide. No value, brand reference or material name constitutes automatic compliance. Current product data, test reports, physical sample or slab and the furniture construction must be approved for each project before ordering or manufacture.
Related materials
